0.7-1.2mm Ceiling Panel PU Sandwich Panel Machine

December 25, 2020

Model NO.: SH-PU
Customized: Customized
Advantage: Use Widely
Condition: New
Brand Name: Suhang
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Control System: PLC
Trademark: Suhang
Specification: CE, SGS, ISO
Origin: Wuxi, Jiangsu
HS Code: 8455229090

0.7-1.2mm Ceiling Panel PU Sandwich Panel Machine

Technical Specifications:


1)The effective working length:24m (adjust according to customer's requirement)
2)Length & width of double belt:1400mm*267mm
3)Material of double belt:Alloy steel
4)Thickness of double belt:14mm 
5)Speed of double belt:3-10m
6)Heat treatment of double belt:HRC25º
7)Diameter of pin of double belt:φ40mm 
8)Material of pin:Alloy steel
9)Hardness of pin:HRC500
10)The plane precision of double belt: static ±0.05mm ;dynamic±0.10mm
11) Up and down synchronous precision of double belt:1/10000
12)Synchronous gear modulus of double belt:M=10
13)Diameter of synchronous  lift cylinder:φ80mm ,work pressure:16MPa
13)Adjust method of side module:electro motion adjust,auto lock ,number indicate 
14)Material of side module:project plastic(Nylon 1010)
15)Standard cushion block thickness specification:40mm,120mm 
17)Supply 50mm one set for roof side module, supply bottom module one set, supply 50mm one set for wall module
18)chain section distance of side module:3/4 inches
19)Up belt lift range:40mm -250mm 
20)Power of hydraulic motor: 7.5KW

0.7-1.2mm Ceiling Panel PU Sandwich Panel Machine
0.7-1.2mm Ceiling Panel PU Sandwich Panel Machine


Our Honorable Prize
0.7-1.2mm Ceiling Panel PU Sandwich Panel Machine
1 Style roller shutter machine
2 Machine dimension (mm) 7500*900*1400
3 Total wight (Kg) 6500
4 Forming steps 17
5 Forming speed (m/min) Approx.10
6 Hydraulic station power(Kw) 13
7 Diameter of shaft (mm) 45
8 Electric condition 380V/3Phase/ 50HZ
9 Power for hydraulic decoiler(Kw) 2.5 and 3
10 Decoiler max capacity (Kgs) 5000
11 Control system  PLC
12 Raw material thickness (mm) 0.5-1.2
13 Effective width(mm) 80
14 Material width(mm) 125
15 Main application roll shutter door
16 Serial number G2011007
 

Mainly to remove the large margin and lay the foundation for the subsequent sequence of precision, the process requires milling the inner contour according to the part structure diagram shown, and pre-finishing the reference hole required for the precision. The aluminum alloy parts are precision-selected with the center hole as the reference hole, and the center hole is boring after the outer circle of the lathe, and the reference hole must be completed before the precision cavity.

Aluminium CNC Milling

Cnc Milling Acrylic Block,Milling Machining Parts,Oem Milling Machining Parts

Chongqing Jin Te Rui Machine Co.,Ltd , https://www.cncjtr.com