HP
Wear Plate is easily formable due to its mild steel base, and is easily welded
without preheating. A cross-checked crack pattern on the wear surface relieves
stresses and supports ductility-which is necessary when forming the plate to
curved shapes. Due to its high percentage of chromium carbide, HP wear plate
has a very low coefficient of friction and will polish to a mirror finish;
thus, increasing lubricity and ultimately, material flow-this is especially
important in prevention of buildup in coal chutes and of carryback on dozer
faces.
HP
Wear Resistant Group offers various products of wear plates namely Cr-Carbide
Weld Clad Plates, Smooth Surface CCO plate, Heat Treated Wear Plates (AR Plate
or Q&T Steel), Casting Plates, Tungsten Carbide Coated Plates in various
grade and multiple size options.
The low carbon steel base plate enables the plate to be welded,
bolted or studded to existing structures, while the hard facing provides the
premier wear-resistant surface capable of working in all applicable service
conditions at either ambient or elevated temperatures.
Due to its excellent properties, HP Wear Plates
work for long-lasting service life and superb performance, which are well
applied to the industries like Cement Plant,
Steel Mill, Mining Site, Power Generation, Construction where need combat with
abrasion.
Steel Plate,Wear Plate Liner,Ptaw Wear Resistant Liners,Welding Wear Resistant Alloy Steel, CCO Wear Plate, Smooth Surface Wear Plate, Tungsten Carbide Steel Plate HuiFeng Wear Resistant Group , https://www.hpwearsolution.com
(2) Make maintenance plans based on inspections;
(3) Prepare spare parts for maintenance;
(4) The required instruments and tools are in good condition.
Precautions in the maintenance work of the CNC vehicle (1) During the maintenance period, the sign “Machine under maintenance†should be erected in a prominent place. The power switch must be in the “OFF†position, and “Power is not allowed to be applied†should be established above the power switch. Sign
(2) The work space is adequate and the light is good;
(3) When loading and unloading heavy objects, if the weight exceeds 20kg, they should be lifted by two or more persons or handled by a crane. The forklift or crane must be operated by a person who has a certificate of operation; the lifting must be directed by a special person;
(4) Do not place tools or workpieces on the sliding surface of the machine tool;
(5) Do not use wet hands to operate electrical circuits and switches;
(6) Do not arbitrarily change circuits or other adjustment potentiometers;
(7) When the power test, pay attention to prevent the danger of high voltage;
(8) Use specified hydraulic oil, grease, lubricating oil or other products with the same performance;
(9) Always use the specified fuses and cables.
Precautions after the completion of the maintenance work of the CNC machine (1) Check again the various parts that have been repaired to ensure that the machine tool can work normally;
(2) Clean up the maintenance site and organize the appearance of the machine;
(3) Transfer the machine tool to the operator for acceptance;
(4) Record all aspects of maintenance work and processing results.
CNC machine tool maintenance safety regulations
Before the maintenance of the CNC car machine maintenance (1) Maintenance personnel personally to the fault site to check the contents of the need to repair;