·Electric Vehicle Industry Roundtable will hold the lead of electric vehicles

"As of the end of 2015, Guangzhou City will promote the promotion of new energy vehicles in about 15,000 vehicles in various fields, exceeding the 10,000 vehicle promotion tasks promised to the state, and strive to reach 1 million new energy vehicles in the city by 2025, and strive to become domestic. "Electric vehicle production and the transformation and upgrading of the automotive industry", yesterday, hosted by the Guangzhou Municipal People's Government, Guangzhou Automobile Group hosted the "Innovation Drives the Future, Zhilian Green Tomorrow - 2016 China Guangzhou International Investment Conference Electric Vehicle Industry Roundtable" ( The following is a round table held in Guangzhou, from the relevant ministries and commissions of the Ministry of Industry and Information Technology and the leadership of the Guangzhou Municipal Government, Guangzhou Automobile Group, Qingdao Te Rui De, Jie Shi Tang, LeTV and other well-known car and Internet companies, and China Automotive Technology and Research Center More than 120 people, including representatives from scientific research institutions and institutions of higher learning, such as Sun Yat-Sen University, attended the development and future trends of Guangzhou Electric Vehicles. In addition, GAC Group also provided the Chuanqi GA6 sedan as the designated VIP of this roundtable. The reception car provides guests with environmentally friendly, comfortable and safe driving services.
Policy support: speed up the construction of charging facilities
It is reported that "Made in China 2025" proposes that electric vehicles are the development direction of China's future vehicles. With the introduction of a number of policies to support the new energy automobile industry, China's new energy vehicles have achieved rapid development in recent years.
According to the output data released by the Ministry of Industry and Information Technology, in 2015, a total of 379,000 new energy vehicles were produced, a four-fold increase over the same period last year. Among them, the production of pure electric passenger vehicles was 142,800 units, a three-fold increase over the same period of last year. The production of plug-in hybrid passenger vehicles was 63,600 units, a three-fold increase over the same period of last year. The production of pure electric commercial vehicles was 147,900 units, an increase of eight times. Electric hybrid commercial vehicles produced 24,600 units, a year-on-year increase of 79%.
In the 2016 government work report, Premier Li Keqiang clearly stated that “it is necessary to speed up the construction of urban parking lots and new energy vehicle charging facilities”. The relevant person in charge of the Ministry of Industry and Information Technology said recently that China's new energy vehicles have entered the growth stage, and new energy vehicles represent the direction of industrial adjustment. "It is expected to grow more than double this year."
Government initiatives: New energy vehicles target millions of vehicles
At yesterday's electric vehicle industry roundtable, Zhou Yawei, member of the Standing Committee of the Guangzhou Municipal Committee of the Communist Party of China, said that in recent years, Guangzhou has attached great importance to the development of the automobile industry and electric vehicles, and has actively played the role of the country's three largest passenger car production bases and national automobile and parts exports. Bases, national energy conservation and new energy vehicles demonstration and promotion of pilot cities, the introduction of a series of industrial support policies, and strive to create a market-oriented, rule of law environment, promote the establishment of a complete electric vehicle industry chain, gathered a large number of research and development testing institutions, new The annual output of energy buses has reached 5,000, and the annual production capacity of new energy cars is about 30,000.
Since 2010, Guangzhou has been conducting pilot projects for the promotion and application of new energy vehicles for six consecutive years. By the end of 2015, the city has demonstrated and promoted about 15,000 new energy vehicles in the areas of bus rental and environmental sanitation, exceeding the completion of Guangzhou in 2013. The city promised 10,000 vehicles to promote the task, built more than 4,000 various types of charging facilities, and promoted the application scale and completion rate, ranking fourth in the promotion and application of cities.
Zhou Yawei said that Guangzhou will continue to intensify its efforts in the promotion and application of electric vehicles, construction of charging facilities, product development and industrialization, speed up the progress, strengthen the structural reform of the supply side, and actively implement the strategic plan of Guangzhou Manufacturing 2025. By 2025, the city's new energy vehicle production will reach 1 million units, actively improve the new energy vehicle industry system, seize the commanding heights of the industry, and strive to become the leader in the transformation and upgrading of domestic electric vehicle production and automobile industry, and accelerate the construction of charging facilities. By 2020, Basically, a charging infrastructure with moderate advancement, suitable piles, and intelligent and efficient construction will be built.
Enterprise force: car + internet + craftsman spirit
As an important representative of Guangzhou's advanced equipment manufacturing industry, Guangzhou Automobile Group has been committed to the new energy and energy-saving and environmentally-friendly automobile business. Zeng Qinghong, general manager of Guangzhou Automobile Group, said yesterday that “automobile + internet + craftsman spirit” is an inevitable choice for auto companies. The future travel demand is energy-saving, environmentally friendly, safe and comfortable, convenient and efficient. The future automobile group's role is smart green travel service provider + intelligence Electric vehicle R&D manufacturer.
Zeng Qinghong said that Guangzhou Automobile Group will adopt the innovative, coordinated, green, open and shared development concept, adopt the model of integration and innovation, integrate "Internet +" and "artisan spirit" to build an innovative system of GAC characteristics, and break through the promotion and application of intelligent electric vehicles. The bottleneck helps the intelligent network to travel green and realize its own transformation and upgrading.
It is reported that the “13th Five-Year Plan” proposed by Guangzhou Automobile Group in 2015 pointed out that GAC Group will adhere to the pure electric drive-based technical route, master the core technologies such as “Three Powers”, build a new energy vehicle industrialization platform, and realize new energy. The scale of car development.
In order to ensure the successful achievement of the strategic objectives, GAC Group has formulated the “153” new energy development strategy. According to the plan, GAC Group's new energy vehicle production and sales in 2020 exceeded 200,000 units, and formed the technological advantages and fist products of new energy vehicles. The fourth stage fuel consumption target value of 5.0L/100Km is guaranteed.
It is reported that in 2016, Guangzhou Automobile Group invested in the establishment of a new energy automobile company, intending to strengthen investment in the new energy vehicle market. In terms of products, after the GA5REV has been demonstrated in the Pearl River Delta, GAC Group will also focus on launching this year including GA3SPHEV (plug-in hybrid car, GS4EV (pure electric vehicle and GS4PHEV (plug-in hybrid SUV) New energy vehicles. In the next five years, Guangzhou Automobile Group will also launch a number of new energy vehicles, and establish the overall energy of research, production, supply and sales.

Section Mill Rolls

Section mill rolls

Section mill rolls are also called as shape mill rolls, profile mill rolls, which used for producing different kinds of section steel, such as angle steel, channel steel, H beam steel, and large size section steel products.

Available models: blooming rolls or break down rolls, Edger Rolls, roll sleeves or Roll Rings.

Diameter: 1500mm maximum

Unit weight: 25mts/pc

Material: Alloy cast iron, alloy cast steel, alloy adamite, Pearlitic cast iron, adamite, high chromium iron etc.

Casting method: Static casting, centrifugal casting

Our services:

1. Offer the best quality rolling mill rolls.

2. Offer the most competitive price

3. Offer the professional technical support.

4. Offer the timely shipment.


Section Mill Rolls

Section Mill Rolls

Section Mill Rolls,Shape Mill Rolls,Profile Mill Rolls,Beam Mill Rolls

Shijiazhuang BeiKeDeRui Metallurgical Science & Technology Co.,Ltd , https://www.bkdrtech.com