The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
The role of edge banding: PVC Edge Banding For Office,Pvc Edge Banding For Office,Pvc Edge Banding For Office Table,Pvc Edge Banding For Office Furniture Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbpolymer.com
Recently, the "New Energy Bus Production Base" jointly built by FAW Group and the Dalian Municipal Government held a ground breaking ceremony in the Dalian Economic Development Zone. At the same time, Dalian Bus Group has signed a 160 million yuan procurement contract with FAW Bus Dalian Bus Factory, including 150 hybrid buses and 110 natural gas buses. Xu Jianyi, general manager of FAW Group, said at the ceremony that this is an important part of the implementation of the new energy vehicle strategy by FAW Group and an important milestone in the cooperation between FAW Group and Dalian Deepening.
FAW New Energy Bus Production Base is located at No. 57 in Dalian Economic and Technological Development Zone. It covers an area of ​​138,000 square meters and a total investment of 600 million yuan. The new base will adopt advanced manufacturing technology and introduce advanced production equipment to enable the production processes of stamping, welding, painting and final assembly to reach the leading domestic and international level. The new base is planned to be completed and put into use in July 2010. By 2013, the annual production capacity of 3,000 passenger cars will be realized, among which new energy buses will account for 50% of the total output.
Since 2001, FAW Group has invested a lot of manpower, material resources, and financial resources in conjunction with the national “863†plan for a new energy bus development project. It has completed the development of a prototype, prototype vehicle, and prototype vehicle of the hybrid bus. The autonomous new technology centered on passenger car hybrid powertrains, electronically controlled engine systems, and AMT systems with independent intellectual property rights has further accelerated the industrialization of new energy buses.
In December 2008, the Dalian Municipal Government, the Economic and Technical Development Zone Management Committee and FAW Group signed a strategic cooperation agreement to build a production base for energy-saving and new energy buses, further clarifying that FAW-bus Dalian passenger car plant will serve as FAW Group energy-saving and new energy. Bus only production base. In February of this year, the four ministries and commissions of the country identified 13 cities including Dalian as demonstration and promotion cities for “energy-saving and new energy vehiclesâ€.
Li Wancai, Acting Mayor of Dalian City, said at the ground-breaking ceremony that energy-saving and new energy vehicles represent the development direction of the future automobile industry and are an important area for the development of the "green industry." The foundation of the new energy bus base built by Dalian City in cooperation with FAW Group reflects Dalian's responsibility for sustainable economic and social development. It is not only conducive to environmental protection and the construction of ecological livable cities, but also creates the development of Dalian's emerging industries. A rare opportunity. Li Wancai stated that under the new situation of responding to the impact of the international financial crisis, the new energy bus demonstration project is an important measure for implementing central government policies to expand domestic demand, maintain growth, and adjust the structure. As one of the national “energy-saving and new energy vehicles†demonstration and promotion cities, Dalian City will further refine the support and incentive policies, accelerate the implementation of the “33511†project, fully support the development of FAW Group in Dalian, and actively promote the construction of bases to make it as early as possible. Form the scale of the industry, ensure the completion of the national demonstration and promotion tasks, and contribute to the healthy and rapid development of China's energy-saving and new energy automotive industry.
First, the edge banding has the function of blocking harmful gases such as formaldehyde
Good edge banding or multi-sided edge banding can reduce the amount of formaldehyde emission per unit time (ie, slow down the emission rate). It is worth noting that edge banding will not reduce the formaldehyde content of the board, but this has the advantage of edge banding. It can reduce the formaldehyde emission per unit time of unenvironmentally-friendly sheets to a level that is acceptable to humans and does not affect health.
Second, the role of beautifying furniture
Good edge banding has the effect of beautifying office furniture, but if it is to be beautiful, the requirements for edge banding will be higher. Not only must the edge banding and the end surface of the board be firmly and smoothly combined, but also that the edge banding must be combined with other The joints of the surfaces should not have defects such as bottoming, chipping, and large gaps, and the transition should be natural, smooth and smooth.
Third, extend the service life of office furniture
The precise edge sealing design of the board can prevent water or other liquids from entering the board, avoiding the expansion, deformation and breeding of bacteria on the desktop, thereby prolonging the service life of the office furniture, and the office furniture after the edge sealing treatment is also more expensive in terms of cleaning easy.
Fourth, avoid sharp edges and corners from hurting people's bodies
The general edge banding will use the dull edge banding design to smooth the corners of the table, thereby reducing the damage to the body by the sharp corners