Most of the aerial vehicles are working at high altitudes. Because they are working on high-altitude platforms, they are relatively high from the ground. Therefore, when operating, the risk factor will be relatively high. Special attention must be paid to relevant operational matters. Follow the relevant regulations. The completion of the steps ensures that work at heights can be completed smoothly. A detailed description of the Xiao Bian operation specification for aerial work vehicles is provided. Those interested can come to understand the next. High-lift truck operation specification 1. The driver requires a smooth grasp of each operation of the aerial work vehicle. In the process of driving the vehicle, the auxiliary transmission must be completely separated from the hydraulic oil pump so as to prevent accidental operation due to incorrect operation; Pay attention to whether or not you have passed through bridges, tunnels, etc. If you have passed through these areas, see if their heights exceed the height of the equipment of the aerial vehicles and avoid using them at a high level. 2. During the operation of the aerial working platform, if it is found that the hydraulic system is noisy, it must be able to stop work and carry out inspections. After the cause is repaired and repaired, it is necessary to be able to return the work bucket and arm to normal. Unlock the hand brake, retract the leg, and drive again. 3. When working on aerial vehicles, it is necessary to be able to select a good position and try to choose a position that will not hinder people and vehicles from walking in suitable operations. Pay attention to a solid and reliable position and turn on the warning flashlight. Persons who come and go avoid work areas; in the case of windy, typhoon, and other windy weather, they must be able to stop work during the period of safety, and the height of the aerial vehicles will vary with different wind conditions. Remember the wind power series. The bigger, the lower the height of suitable work. The driver must be clear and proficient in the operation of high-altitude trucks. During the operation, he must also wake up to 120,000 minutes to ensure that the safety operations are completed smoothly and without any safety accidents or casualties.
Stone Wet Polisher Accessory includes the backer pad
and Dust Shroud. The rubber backer pad and
aluminum backer pad is popular and sells well in the market. It is necessary
accessory for the stone polisher and hand grinder.
The backer pad
have many differert model, like the aluminum one, the super soft rubber backing
pad, the medium hard
rubber backing pad. 5/8-11 Thread or M14 Thread.
3" 4" 5" 6" 7".
It can suitable
for most of hand polisher, like Makita polisher
and metabo polisher, and also our little elephant polisher.
Stone Wet Polisher Accessory Stone Wet Polisher Accessory,Accessory For Stone Machine,Accessory For Stone Wet Polisher,Aluminum Back Up Pad Shandong Hightop Machinery Co,.Ltd , https://www.hightopmachinery.com
