LDCK electromagnetic flowmeter classified by flow sensor and pipe connection

LDCK electromagnetic flowmeter is classified by flow sensor and pipeline connection type, including flange type, clamping type (clamping type electromagnetic flowmeter), plug-in type (plug-in type electromagnetic flowmeter), screw connection (high pressure electromagnetic flow connected by oil) meter).

(1)Flange connection The traditional connection method of the flange connection is that the sensor has a connection flange at both ends, and the pipe flange is fixed with a bolt and can be installed in one direction. Large diameter sensors use this connection method. The volume and weight are larger than the clip connection.

The length of the two flange surfaces of the DN15~600mm electromagnetic flowmeter has been standardized by the International Organization for Standardization (ISO13359; 1998).

(2) The LDCK electromagnetic flowmeter clamp connection connection connection method developed in recent years, the sensor itself can not be blue, with a longer bolt clamped between the two flanges of the pipeline access pipe system. This type of sensor is small, light and light, and has good adaptability to different pressure specifications and standard flange flange spacings; however, it is only suitable for small diameter (200mm), and it can withstand low liquid working pressure.

(3) The sanitary connection is connected with the IDF holding member of the International Cheesemaking Federation, which enables quick disassembly and installation, facilitating daily frequent cleaning.

(4) Thread connection of small diameter instrument thread. This type of instrument is widely used in medicine, food and other industrial and pharmaceutical industry ratio injection and other places. Threaded connections are also used in oil, geological exploration and other high-pressure water injection or cement slurry flow measurement 16 ~ 25MPa, thread shape is trapezoidal.

LDCK electromagnetic flowmeter

Product

  1. Step wheel 80x32 bearing 6203 for escalator spare part
  2. Step wheel 80x25 bearing 6304 for escalator spare part
  3. Step wheel 70x25 bearing 6204 for escalator spare part
  4. Step wheel 76x25 bearing 6204 for escalator spare part
  5. Step wheel 80x25 bearing 6006 for escalator spare part

Specifications

  1. Long life & stable
  2. Factory made


Rollers

Rollers for Escalator Spare Part, Escalator Reversing Chainwheel, Escalator Step Chainwheel, Step Wheel Bearing

Ningbo Xinda Elevator Traction Technology Co., Ltd. , https://www.xinda-elevator.com