The use of mobile small refueling vehicles can meet the needs of equipment refueling well. However, this kind of vehicle is a dangerous goods professional transport vehicle, and there are certain differences in the use of ordinary vehicles. In order to ensure the safe and efficient use of the vehicle, the following issues should be taken into account when using the mulberry to ensure safe completion of the refueling work. First, the maintenance work on vehicles is usually done. The overhaul of the refueling vehicle is very important, and regardless of the size of the vehicle, attention is paid to usual maintenance work. For mobile small refuellers, the place where the vehicle is to be placed should be secured first, where there is a separate fuel tanker, and there is no open fire around and the fire extinguishing equipment is available. During inspection and maintenance, it is necessary to check the key equipment such as oil storage tanks, control valves, oil pipelines, and refueling guns. Such as whether there is a leak, whether there is wear or corrosion. If problems are found, they must be dealt with promptly to prevent leaks and other dangerous situations. Second, some issues that should be noted when using. The most critical part of the use process is to control the equipment for refueling. When the fuel is refueled, the oil leakage must be controlled. The pressure of the fixed quantity should be reasonably controlled, and the maximum pressure of the booster pump should not be exceeded to ensure safe refueling. For novice refueling staff, the actual operation should be carried out under the condition that the quantity of refueling equipment is mastered, and related protective measures must be taken to strictly comply with the refuelling standards. The high-pressure valve is the core control component that completes the refueling process. It is necessary to have a good grasp of the pressure. Otherwise, oil leakage or oil running may easily occur. Once it occurs, it is easy to cause fire danger when the vehicle is running. Third, some issues that should be noted after the refueling work is completed. After the refueling work is completed, the main work is still the maintenance of the equipment. High-pressure valves, oil pipes, and fuel tanks are also the focus of inspections. To ensure that there are no leaks or damages in these critical areas, and to check if there is any oil leaking around, clean up the work in a timely manner to prevent any danger.
MC introduces advanced technology and improve the Mast Climbing Platform,
the Mast Climbing could be used to :
Biulding ,Glass screen wall,brick building, wall decoration, Industrial Coatings,building renovation
Nonstandard building structure:
Chimney dismantle,hub interchange renovation, silo building maintenance,cooling tower building maintenance, bridge building and maintenance,hydropower plant construction
MC construction platform/mast climbing works with the same driving principle with the Building Hoist. Its main parts can be interchanged with building hoist such as mast sections,rack, pinion, reducing device and so on.
And its width and length can be changed according to request. It is requisite equipment in construction job. Additionally ,it is no need for foundation so that it is easy to change the working site.
Safety Features:
1. With overload
2. With balance device
3. Moving synchronize device(used in twin mast platform)
4. With anti-falling safety device( can install as client need)
5. With constant speed safety device, prevent platform sliding down overspeed
6. With hand-operation landing equipment, it can be landed by man when supply power cut off.
Mast Climbing Mast Climbing,Mast Climbing System,Mast Climbing Platform,Mast Climbing Work Platform Miliscorp Industry Ltd , https://www.mctowercrane.com