Right now, the demand for 10 square sprinklers is very high for many municipalities such as the Urban Council and Cityscape. Next, we will explain why the 10-way sprinkler is superior to the ordinary road-cleaning vehicles in the past in terms of performance and price. First of all, the first thing to know is that in the past, road sweepers used a rolling bead to clean up, that is, they sprayed large quantities of water and poured it on the road, and then cleaned it again. As a result, it is easy to generate dust in the air, so it also causes secondary pollution. Instead, the 10-square-sprinkler is a pure-absorption street cleaner. Specifically, the air flow is sucked into the vacuum system and the integrated system by means of a physical negative pressure. In this way, the environmental pollution of secondary dust can be well resolved. At the same time, during the operation process, intelligent digital mechanized remote control means is used throughout the operation. Therefore, only one person is required to master the work in the operation room, and during the operation, it is also very simple and easy. At the same time, there is a second feature, that is, in the process of handling airborne dust in the 10-way sprinkler, there is also a model that sprays mist to precipitate dust and fine particles in the air onto the ground. Then carry out large-scale cleanups and clean them in one step. In this way, the dust in the air can be greatly reduced. However, many customers have doubts about the 10-square-sprinkler , that is, how high is the dust removal rate of the 10-way sprinkler, and is the waste of water resources a problem? In addition, many people have a failure rate for the 10-way sprinkler. And preparations for the maintenance period are also more worrying. In fact, the dust removal rate of the 10-party sprinkler is as high as 98% or even 100%, so it is said that this is strictly tested before leaving the factory, as well as examined, and there is no need to worry about it. Moreover, the reason for adopting water mist to clean up dust in the air is to minimize the waste of water resources. So these aspects are also the specific advantages of the 10-way sprinkler. And need to know that the 10 party sprinkler actually has a very long life cycle, the effective working life cycle is as long as 25 to 35 years, and a considerable number of very qualified manufacturers have a lifetime inspection of the 10 party sprinkler. Maintenance, so this does not need to worry about. The year of 1999, baking-free brick have been put forward in the first time, by Shine machinery. People in construction industry all wish to know more about baking-free brick, which is the trend of society development. The reason of the widely use for baking-free brick, is the 3 big difference compared with baked brick, as follow: Baking-free Brick Making Machine Baking-Free Brick Making Machine,Environmental Brick Making Machine,Baking-Free Clay Brick Making Equipment,Baking-Free Clay Brick Making Machine Shandong Shenghuai Trading Co., Ltd. , https://www.shinebatchplant.com
1.Raw materials
Baking-free brick(block): Choose the construction waste, stonework waste, fly coal ash, dry slag, boiler slag, etc to make the brick.
2. Investment
Baking-free brick(block): A concrete block making machine cost less investment while maximize the capacity of the brick making mahcine.
3.Influence for environment baking-free brick(block): Use the waste to make the brick, eco-environment. Baked brick(red brick): Use earth, make a sharp drop in farmland, baking will release the CO2, will exacerbate global warming, ozone hole, more and more all humans will expose in ultraviolet ray(UVA), it's no life lives under UVA. The Chinese government have issue the policy to use concrete brick replace the baked brick. Many city forbidden the usage of Baked brick.