Car Dashboard Polish

May 29, 2020

  • Model NO.: TE-8019
  • Capacity: 300 - 500ml
  • Volume: 450ml
  • Trademark: TEKORO
  • Specification: CE, RoHS, SGS
  • HS Code: 34502000
  • Type: Lustre Adding Car Cleaning Chemical
  • Brand: Tekoro
  • Validity: Three Years
  • Transport Package: 12PCS/CTN
  • Origin: Guangdong, China
Tekoro Dashboard and Leather Wax can protect leatheroid, plastics and rubbers from harmful UV-rays, high temperature and ozone; Prevent panels, leather and tyre from fading, cracking, wrinkling and aging; Enhance and maintain the original gloss of the paint; Eliminate static and dirt retention.

Applications: Dashboard, cockpit, leather, car tire, bumper, etc 
Flavors available: Lemon, Strawberry, Vanilla, Apple, Ocean, New Car, Orange, Cologne, etc 

Item No.: TE-8019
Can Size: 65mm x 158mm H 
Package: 450ml x 12PCS/CTN 
Carton Size: 275x205x205 mm 
20ft Container Loading: 2500 cartons 
Sizes of 650ml or 750ml are also available. 

1. Remove any water, dirt, grease and so on. 
2. Shake the can well before use. 
3. Hold the can 15-20 cm away from surface to be sprayed. 
4. After spraying, gently Polish with a clean, soft, dry cloth. 

1. Keep away from heat, flame, spark and other source of ignition. 
2. Store in a cool, dry place (45c); Avoid direct sunlight. 
3. Do not clash, puncture, or incinerate the can. 
4. Keep out of reach of children.

Packing details:
Volume Pack Qty Carton Specs. Carton Dimension (estimated) Container Qty (cartons)
L(cm) W(cm) H(cm) 20FT' 40HQ
250ml 24pcs/ctn Kraft paper 33 22 17 2500 5600
400ml 12pcs/ctn Kraft paper 27.5 20.5 20.5 2500 5600
650ml 12pcs/ctn Kraft paper 27.5 20.5 29 1816 3294


Car Dashboard Polish

There are many standard metal deck or steel deck profiles that a Composite Floor Decking Sheet Roll Forming Machine is technically capable to produce, and these deck sheets are widely used in a variety of applications.

Composite Floor Decking Sheet Roll Forming Machine have been designed for the production of various types of metal decks which are usually applied for roofing and floor industries, and sometimes for bridge construction as well.  The most popular steel decks produced by our Composite Floor Decking Sheet Roll Forming Machine are currently used in the industiral applications as following:

Composite Floor Decking Sheet Roll Forming MachineComposite metal form deck roll forming machine for the production of steel floor decking

Steel roof deck: The steel roof decks are manufactured generally for the construction of pitched, flat, or curved roofing almost on all kinds of buildings; 
Composite metal deck: The composite metal decks have embossments in the vertical ribs designed to interlock with concrete slabs, creating a reinforced concrete slab to develop a composite floor system.
Metal form deck: Metal form decks are produced and used extensively also in floor construction as a permenant steel base for poured reinforced concrete floor slabs. 
Architectural deck: This kind of steel deck offers architects and engineers the ability to creat amazing designing for striking and spacious interiors, as well as dramatic and high-performing exteriors.
Bridge deck: Where a bridge has main beams installed at suitable centres, steel decking may be placed across the beams without additional supports, suitable for new construction and bridge rehabilitation.

12196174_1509995512644800_3924349027016545761_n

Brief introduction of steel deck roll forming machine:

losacera25

There are different steel deck roll forming machines manufacturing metal decks for different applications, and the configuration or components of each machine vary accordingly, for example, some deck machine have embossing rolling tools while some others do not. As a Chinese enterprise, MAXON has been awared that metal deck roll forming machines have been increasingly popular in Chinese market, and in China over 90% steel deck roll forming machines buyers produces metal floor deck and that`s why in China a deck roll forming machine is most of time named as metal Floor Deck Roll Forming Machine or steel decking floor roll forming machine.

Generally a metal deck or steel deck roll forming machine consists of a 5TON manual de-coiler, feeding guide, an electrical entry shearing with 0.75KW motor power,a roll forming part including an embossing tools, transmission system, hydraulic system, a PLC control cabinet, a hydraulic oil pump and runout tables to support the final products.

Technical parameters of Composite Floor Decking Sheet Roll Forming Machine:


  • Material: Hot-dipped galvanized steel coils;
  • Thickness of Material: 0.8mm-1.3mm;
  • Coil Width: 1219/1250mm;
  • Coil Weight: 5 Tons;
  • Roller Stations: 26-35 stations;
  • Diameter of Shaft: 76mm;
  • Material of Shaft: 45# steel;
  • Material of roller: 45#steel with quenching treatment and coated with hard chrome 0.05mm thickness;
  • Rolling stands structure: conjoint type;
  • Machine Frame stand: 36#H Beam welded structural steel;
  • Forming speed: 0-12m/min;
  • Main Power: 2x11KW;
  • Overall Dimensions: 13500mmx1500mmx1300mm;
  • Weight of the machine: Appro.12 Tons;
  • Cutting: hydraulic cutting with three cutting blades method;
  • Material of Cutting Blades:Cr12 steel;
  • Hydraulic Power:4KW;
  • Cutting lengths and quantites: Automatically cutting according to the length and quantities the clients set on the touch screen;
  • PLC Control Box:700mmx1000mmx300mm;
  • Control system: Panasonic PLC, Inverter, CHNT transformer and Omron encoder;

Composite Floor Decking Sheet Roll Forming Machine

Composite Floor Decking Sheet Roll Forming Machine,Floor Cold Roll Forming Machine,Composite Decking Roll Forming Machine,Composite Steel Floor

Botou Golden Integrity Roll Forming Machine Co.,Ltd , https://www.jcxsteelrollformer.com