Copper Cable Wire Recycling Machine

Introduction of Copper Cable Recycling Machine:
The JLF series copper wire recycling machine is designed for processing waste household communication cables, car cables, motor cables, and other industrial cables. This machine includes a crushing and separation system, along with an efficient dust collection system to produce clean copper pellets and plastic pellets. The JLF-400-1 model, with a capacity of 80-100kg/h, is ideal for small factories or new businesses entering the wire recycling industry. It features a compact design that occupies minimal space, making it easy to move and operate. Only one operator is needed to manage the entire system.


Applications of Copper Cable Recycling Machine:

Applicable wires:	Waste communication copper cables, motor cable, car cable, industrial cable, household cable, enamelled cable.
Applicable wire diameter:	0.3-20mm (the diameter is for each single strand).

If you are unsure whether your cables are suitable for our equipment, you can send samples for free testing. We guarantee that the test is completely free of charge. TESTING IS FOR FREE!




Specifications of Copper Cable Recycling Machine:

Model	Recycling capacity	Processed wire dia.	Total power	Voltage	Dimension	Weight
JLF-400-1	80-100kg/h	0.3-20mm	11.92KW	As required	1.5*1.5*1.9m	750kg

Description of Copper Cable Recycling Machine:
1. Crushing System: The first step in the recycling process involves crushing the scrap copper wires into small pellets of 5-8mm in size using 14 moving blades. 2. Screen: The screen inside the vibrating separator helps separate copper pellets from mixed materials. Different hole sizes allow customers to choose based on the raw material. 3. Blades: There are 12 moving blades inside the system. 4. Output Copper Pellet: After passing through the vibrator, the copper pellet undergoes a second separation. With our granulator machine, you can achieve nearly 100% purity. 5. Output Plastic Pellet: The plastic pellets also go through a second separation to ensure high purity. 6. Small Vibrator: Two small vibrators are used for the second separation of both copper and plastic pellets.



Working Principle of Copper Cable Recycling Machine:

Wires and cables are fed into the crusher, where they are crushed and separated into copper and plastic. The size of the crushed material depends on the mesh size of the riddle. A larger mesh results in longer pieces and higher output. Choose the mesh based on the material type during production.

The crushed material, which consists of copper granules and plastic pieces, is transported to the separator via a conveyor. During this process, dust and lightweight plastic fragments (such as fiber, rope, or tapes) are collected by a pressure-reducing blower. The blower is connected to a dust collector, which uses a dust bag to prevent environmental pollution. Dust and some lightweight plastic fragments are collected in the bag and discharged when full.

The separator is used to separate plastic pieces from copper granules. Based on differences in physical properties and specific gravity, the materials experience a specific gravity deviation under the influence of aerodynamic forces and vibration friction. By adjusting the speed of material conveyance and amplitude parameters, copper granules (with higher specific gravity) will move to the bottom of the riddle and upward, while plastic pieces (with lower specific gravity) will move above the copper granules and downward. Both materials are finally discharged through different openings.

Related Machines for Copper Cable Recycling:
Cable Stripper: For large multi-strand copper wires, it's recommended to strip the core before feeding into the granulator.
Double Shaft Crusher: If the raw material is long, cutting it into smaller pieces before granulating is beneficial.
Blade Sharpening Machine: Blades may need maintenance after prolonged use to maintain sharpness.
Magnetic Conveyor: If there is any iron mixed in the copper wire, a magnetic conveyor can be added to remove impurities and improve purity.
Belt Conveyor: Provided for customers who require fully automatic copper wire feeding.


Other Models:
Please contact us freely for more information.


FAQ
1. Are there quick-wear parts on the machine?
The main wear parts are the blades and screen, which have a service life of over two years. We also provide a blade sharpening machine for maintenance.

2. What is the maximum continuous working time for the recycling machine?
Typically, 10 hours per day.

3. Is the machine easy to operate? How many workers are needed?
We have designed a precise but simple control system. For a single unit, only one worker is required. For a complete line, two workers are needed.

Contact Information:
Attn: Tina
Mobile: +86 159 8192 5357

Suspending Type Air Cooler

Suspending Type Air Cooler,Air Cooler Evaporative,Air Water Cooler,Air Separation Cooler

TAIZHOU NANFENG COLD-CHAIN CO., LTD , https://www.windpolar.com