Deep Well Borehole Submersible Water Pump

Model NO.: SJ
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Semi-Open
Usage: Pumps
Materials: PP, Pph, PVDF, FEP, PE and Pehd
Flow Rate: 1- 1800m3/H
Pressure or Delivery Head: 1.5-80m
Speed: 1450rpm/2900rpm
Driven Mode: Electric Motor or Diesel Engine
Inlet /Outlet: 50mm-350mm
Pump Type: Fluoroplastic Chemical Pump
Voltage: 380V/400V/415V
Temperature: -50 Centi-Degree to 180 Centi-Degree
Application Field: Petrochemica, Metallurgy, Chemical Wastewater etc.
Trademark: SUNDREAM
Transport Package: Poly Wood Case or Export Carton
Specification: ISO9001, CE, SGS
Origin: Shanghai
HS Code: 8413709990
Model NO.: SJ
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Semi-Open
Usage: Pumps
Materials: PP, Pph, PVDF, FEP, PE and Pehd
Flow Rate: 1- 1800m3/H
Pressure or Delivery Head: 1.5-80m
Speed: 1450rpm/2900rpm
Driven Mode: Electric Motor or Diesel Engine
Inlet /Outlet: 50mm-350mm
Pump Type: Fluoroplastic Chemical Pump
Voltage: 380V/400V/415V
Temperature: -50 Centi-Degree to 180 Centi-Degree
Application Field: Petrochemica, Metallurgy, Chemical Wastewater etc.
Trademark: SUNDREAM
Transport Package: Poly Wood Case or Export Carton
Specification: ISO9001, CE, SGS
Origin: Shanghai
HS Code: 8413709990
Overview:
CP Fluoroplastic Chemical Pump are single-stage horizontal centrifugal pumps with conventional mechanical sealing system. Connected to the driving part by means of a spacer coupling (back pull-out version) and installed on a common baseplate, their design is fully compliant with standards DIN 22858 and ISO 2858. The metal armouring applied to components made from thermoplastic resins, such as PP, PPH, PVDF, FEP, PE and PEHD, ensures dimensional stability and mechanical strength.

CP series pumps can mount various types of single, or double mechanical seals of the top domestic and international brands, which can work with corrosive liquids containing suspended solids and/or crystals. Generously-sized shaft and bearings and semi-open or closed impeller make this series of Hi-Tech pumps ideally suited for the most demanding process services. These pumps are typically used in all industrial sectors for the transfer of liquids, in particular: Corrosive liquids(including acid and alkaline), slurry, liquids containing crystals, dirty liquids, effluents and chemical wastewater. If the medium is hydrofluoric acid or hydrobromic acid, it also can be used.

It is suitable for transporting acid, alkali and salt solution, strong oxidant, organic solvents, corrosive slurries, solvents, hydrocarbons and other strong corrosive medium, not containing particles.

1) Main Features:
A) Dimensions comply with DIN EN 22858 (ISO 2858)
B) Parts in contact with the medium made of solid plastic
C) Sturdy armour in ductile cast iron
D) Closed impeller with low axial thrust
E) Open, axially adjustable impeller with back vanes
F) Corrosion protection of metallic components by multiple coatings of epoxy resin paint
G) Fast assembly and disassembly
H) Low noise, steady performance
I) No leakage

2) Applications:
A) Petroleum Industry
B) Chemical Industry
C) Pharmacy and Health
D) Environmental and Water treatment
E) electroplating industry
F) Environmental protection
G) food service industry
H) Printing and dyeing area
I) textile industry, etc

3) Technical Parameter:
A) Flow: 1- 1800m3/h
B) Head: 1.5-80m
C) Operating Temperature: FEP(-50 - +180º C), PVDF(-20 - +130º C), PP(0 - +100º C), PE(-40 -+80º C)
D) Motor: Closed, externally ventilated
E) Insulation class: B (Class F if required)
F) Protection class: IP44 / IP54 / IP55(squirrel cage motor)
G) Duty: Continuously rated

4) Design: Chemical Norm Pumps
5) Materials: Parts of the pump in contact with the liquid are manufactured from the following standard

Plastics:
Polypropylene PP
Temperature range form 0º C to +100º C
High Molecular Polyethylene PE
Temperature range from -50º C to +80º C
Polyvinylidene Fluoride PVDF
Temperature range from -20º C to +130º C
These materials have been selected as a result of many years of experience in the use of chemical engineering materials to satisfy the special demands made in pump construction.
specification and performance parameter 
Model Capacity(m3/H)  Head (M)  Power(KW) Rotary speed(rpm)
Medium Density(g/cm2)  
1 1.35 1.85  
CP32-25-125 3 23 1.1 1.5 2.2 2900
6 20
8 17.5
1.5 6 0.37 0.55 0.75 1450
3 5
4 4.2
CP100-65-250 60 88 45 55 75 2900
100 80
120 74
30 22 5.5 7.5 11 1450
50 20
60 18.5
our chemical pump size is from 50mm to 350mm, with different flow and head
for more detailed specification and performance data , please contact us directly by email or call.
Overview:
CP Fluoroplastic Chemical Pump are single-stage horizontal centrifugal pumps with conventional mechanical sealing system. Connected to the driving part by means of a spacer coupling (back pull-out version) and installed on a common baseplate, their design is fully compliant with standards DIN 22858 and ISO 2858. The metal armouring applied to components made from thermoplastic resins, such as PP, PPH, PVDF, FEP, PE and PEHD, ensures dimensional stability and mechanical strength.

CP series pumps can mount various types of single, or double mechanical seals of the top domestic and international brands, which can work with corrosive liquids containing suspended solids and/or crystals. Generously-sized shaft and bearings and semi-open or closed impeller make this series of Hi-Tech pumps ideally suited for the most demanding process services. These pumps are typically used in all industrial sectors for the transfer of liquids, in particular: Corrosive liquids(including acid and alkaline), slurry, liquids containing crystals, dirty liquids, effluents and chemical wastewater. If the medium is hydrofluoric acid or hydrobromic acid, it also can be used.

It is suitable for transporting acid, alkali and salt solution, strong oxidant, organic solvents, corrosive slurries, solvents, hydrocarbons and other strong corrosive medium, not containing particles.

1) Main Features:
A) Dimensions comply with DIN EN 22858 (ISO 2858)
B) Parts in contact with the medium made of solid plastic
C) Sturdy armour in ductile cast iron
D) Closed impeller with low axial thrust
E) Open, axially adjustable impeller with back vanes
F) Corrosion protection of metallic components by multiple coatings of epoxy resin paint
G) Fast assembly and disassembly
H) Low noise, steady performance
I) No leakage

2) Applications:
A) Petroleum Industry
B) Chemical Industry
C) Pharmacy and Health
D) Environmental and Water treatment
E) electroplating industry
F) Environmental protection
G) food service industry
H) Printing and dyeing area
I) textile industry, etc

3) Technical Parameter:
A) Flow: 1- 1800m3/h
B) Head: 1.5-80m
C) Operating Temperature: FEP(-50 - +180º C), PVDF(-20 - +130º C), PP(0 - +100º C), PE(-40 -+80º C)
D) Motor: Closed, externally ventilated
E) Insulation class: B (Class F if required)
F) Protection class: IP44 / IP54 / IP55(squirrel cage motor)
G) Duty: Continuously rated

4) Design: Chemical Norm Pumps
5) Materials: Parts of the pump in contact with the liquid are manufactured from the following standard

Plastics:
Polypropylene PP
Temperature range form 0º C to +100º C
High Molecular Polyethylene PE
Temperature range from -50º C to +80º C
Polyvinylidene Fluoride PVDF
Temperature range from -20º C to +130º C
These materials have been selected as a result of many years of experience in the use of chemical engineering materials to satisfy the special demands made in pump construction.
specification and performance parameter 
Model Capacity(m3/H)  Head (M)  Power(KW) Rotary speed(rpm)
Medium Density(g/cm2)  
1 1.35 1.85  
CP32-25-125 3 23 1.1 1.5 2.2 2900
6 20
8 17.5
1.5 6 0.37 0.55 0.75 1450
3 5
4 4.2
CP100-65-250 60 88 45 55 75 2900
100 80
120 74
30 22 5.5 7.5 11 1450
50 20
60 18.5
our chemical pump size is from 50mm to 350mm, with different flow and head
for more detailed specification and performance data , please contact us directly by email or call.

Shantui Wetland bulldozer is designed and developed especially in response to the characteristics of wetland working conditions, featuring advanced technologies and high reliability, and can work normally in the soft and muddy soil conditions inaccessible by conventional machine models.

Shantui bulldozers are often used in road building, construction, mining, forestry, land clearing, infrastructure development, and any other projects requiring highly mobile, powerful, and stable earth-moving equipment. Shantui hydraulic drive series bulldozer features high technologic content, advanced and reasonable design, strong power, high productivity, and easy maintenances and repairs and can adapt to severe working conditions.

Wetland Type Dozers

Wetland Type Dozers,Powerful Dozer,Concrete Mixers,Motor Graders

Shandong Shantui Construction Machinery Import & Export Co.,Ltd. , https://www.bulldozers.pl