Dongfeng Dolika and Capt Tanker (tank volume 4000-6000L) adopt Dongfeng original two-wheel chassis, which has the advantages of high safety performance and high chassis strength. The engine uses Dongfeng original Chaoyang 100-horsepower diesel engine, 7.50-16 tires. , With direction assistance, with booster, without air conditioning, steam brake, 5-speed gearbox, 2.2 tons front axle, 5 tons rear axle, overall dimensions (mm) 5900/1950, total mass (kg): 7350, Service quality (kg): 3650, load quality (kg): 3505. Effective volume of the tank: 3 tons - 4 tons. Dongfeng Little Dolika Tanker Refueller: Chassis adopts Dongfeng Little Dolika, air brake, can turn the cab forward, 5-speed gearbox, Chaochai CY4102 95 horsepower country four emission standard engine; tank truck body loading configuration: The tank body adopts Wuhan high-quality 5mm thick carbon steel plate; a European standard tank mouth; a tank bottom pneumatic bottom valve (emergency shut-off valve); equipped with a baffle plate (tank attached inspection report); installation of Shanghai Bolai NC large flow refueling Machine (installation position optional front or bottom); 15m automatic return reel and oil gun; engine muffler front; tank with toolbox; with pump (pump / pump out); equipped with fire extinguisher; Two hoses; one protective cap. Tank configuration: actual volume: 6 cubic meters can hold 5 tons of oil, power take-off device, with special oil pump, subsea valve, with two long oil suction pipes such as oil tank, lock, fire extinguisher, fire cap and so on. The tank adopts 5mm thick high-quality large-scale carbon steel plate for roll forming at one time. The top of the tank is equipped with a retractable guardrail. It is completely seamlessly formed. The tank body and each bumper are attached with visual reflective strips, and the word “explosive†is attached. Type CSC5041GJY4 refueling vehicle 1, transportation medium: gasoline, item number: 3, density: 700 kg/cubic meter; effective volume of the tank: 2.15 cubic meters, external dimensions of the tank (mm): 4000 (including fuel tanker 900) ×1210×820. Optional rear structure, vehicle color optional; text spray location can be changed. 2, side protection cold-formed steel / Q235, bolted; rear protection cold-formed steel / Q235, welding, high section 350mm, section width 50mm, the lower edge of the ground 500mm. Dongfeng Duolika 8.3 side chassis with DFA1110SJ11D3, wheelbase 3800MM, engine model CY4102-CE4C, the chassis must be equipped with a limited-speed device, retarder (assisted braking device) disc brake, etc., the user comes with, refueling car: cans Body volume is made according to the announcement size, about 10.2 cubic meters, tank thickness 5MM (≧4.2MM), head 5MM (≧4.2MM) thick, with Shen Wei 80-60 pump, pump inlet to the pump on the left, 3 wave board The first wave protection plate is fully welded from the sealing head 800, without artificial mouth, leaving a gas outlet at the bottom and the top of the wave prevention plate, with a full set of European standard (a European standard tank mouth, a sea bottom valve, a bottom loading oil, An exhaust gas recovery, an anti-overflow probe rod and probe rod seat), under loading of oil, exhaust gas recovery on the right side, with Zhengxing large flow refueling machine and bold 15 meters automatic return reel with gun in the warehouse, With a flow meter of Hefei 40 (in and out can be passed but can not pass the table), all pipes for the 2.5-inch, checkered walkway, with folding guardrail, with a square toolbox, all locks with European-style lock, inside the ladder with a safety notice Brand, new rear bumper with license plate lamp, with a fire cap, Root 15 meters long pipeline, yin and yang two ends, two fire extinguishers, the remaining plant standard. Ensure that the dimensions of the tank and the vehicle are made according to the announcement. Paint: silver-pink, reflective tape, reflective tape, three "explosive" characters, total spray mass, volume, number of cabs, safety notice. The product structure is firm, the size is accurate,and can be customized for various vehicle models,which can be designed, developed and manufactured independently according to customer requirements, the customer unanimously gives the high praise, Seat Back Lock With Massage,Weld Part Stamped Sheet Metal Parts,Steel Seat Back Lock Product,Adjustable Seat Back Lock NINGBO YINZHOU HONGBO AUTOPARTS CO., LTD., , https://www.honghuaqiye.com
the specific price is subject to the quotation of the salesperson at that time, welcome to consult