Investment Casting Equipment,Investment Casting Machine,Lost Wax Casting Equipment,Vacuum Investing And Casting Machine Dongying Fuhao Precision Casting Science & Technology Co.,Ltd , https://www.fh-cast.com
Â
Nowadays more and more stamping owners have chosen to use the feeder, the feeder is matched with the punch progressive die type for continuous processing.
This type of processing not only improves stamping production efficiency, but also significantly improves the quality of finished products, improves material utilization, and reduces production costs.
However, in the actual use process of the punch feeder production line, the material feeding is often not in place due to some internal or external factors, and the feeding speed of the feeder is very fast, and it is often difficult to detect in real time when the feeding is not accurate.
Not only the quality and processing technology of the finished product are difficult to guarantee, the scrap rate is high, but also the mold is damaged, and the maintenance and use cost is increased.
The feeder can be easily solved by mismatching the detection device. The feeder misfeed detection device consists of two parts: the detection host and the photoelectric unit, and the photoelectric part is assembled on both sides of the die inlet port of the punching die.
The cam signal of the punching machine is used as the trigger signal, and is controlled by the PLC program to realize the real-time detection of various insufficient feed detection or the purpose of detection when the feeder feeds the feed mold, thereby effectively ensuring the safety of the mold and ensuring the safety of the mold. Stamping production process and product quality are guaranteed.
1. Insufficient feeding detection
Insufficient feeding detection and feeding distance detection are mainly used to match the feeding time and angle of the punching machine to detect whether the feeding of the feeder is correct and automatically control the punching process.
Insufficient feeding detection is to carry out feeding once after the first step of the progressive die. The feeding distance is certain. This distance is determined by the punch feeder. It is important when the feeding is in place. If the feeding of the feeder is not in place, the progressive die will be caused. The stamped product has been scrapped or the mold has been damaged.
2. by checking out
Through detection, it is mainly used in the production process of product blanking, and the detection of blown products is eliminated to prevent the phenomenon of stacking.
The product is detected by discharging once after the completion of one stamping of the progressive die. The discharging is to blow out the product by using a compressed air blowing device in a certain cam cycle, and the product passes through the light curtain to cut off the light curtain signal.
During this process, the product (or scrap) must pass through the light curtain. If it is not left in the progressive die through the light curtain, the progressive die will cause damage to the mold or product during the next press.
Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6:Â Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD"Â for you and for us, so we have professional team work and production line can make nice quality in short time.
1. Â Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. Â After-Sales service:We have an efficient team to meet 24*7 all day service.
3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Â Engineers can provide service machinery overseas.
Â
Nowadays more and more stamping owners have chosen to use the feeder, the feeder is matched with the punch progressive die type for continuous processing.
This type of processing not only improves stamping production efficiency, but also significantly improves the quality of finished products, improves material utilization, and reduces production costs.
However, in the actual use process of the punch feeder production line, the material feeding is often not in place due to some internal or external factors, and the feeding speed of the feeder is very fast, and it is often difficult to detect in real time when the feeding is not accurate.
Not only the quality and processing technology of the finished product are difficult to guarantee, the scrap rate is high, but also the mold is damaged, and the maintenance and use cost is increased.
The feeder can be easily solved by mismatching the detection device. The feeder misfeed detection device consists of two parts: the detection host and the photoelectric unit, and the photoelectric part is assembled on both sides of the die inlet port of the punching die.
The cam signal of the punching machine is used as the trigger signal, and is controlled by the PLC program to realize the real-time detection of various insufficient feed detection or the purpose of detection when the feeder feeds the feed mold, thereby effectively ensuring the safety of the mold and ensuring the safety of the mold. Stamping production process and product quality are guaranteed.
1. Insufficient feeding detection
Insufficient feeding detection and feeding distance detection are mainly used to match the feeding time and angle of the punching machine to detect whether the feeding of the feeder is correct and automatically control the punching process.
Insufficient feeding detection is to carry out feeding once after the first step of the progressive die. The feeding distance is certain. This distance is determined by the punch feeder. It is important when the feeding is in place. If the feeding of the feeder is not in place, the progressive die will be caused. The stamped product has been scrapped or the mold has been damaged.
2. by checking out
Through detection, it is mainly used in the production process of product blanking, and the detection of blown products is eliminated to prevent the phenomenon of stacking.
The product is detected by discharging once after the completion of one stamping of the progressive die. The discharging is to blow out the product by using a compressed air blowing device in a certain cam cycle, and the product passes through the light curtain to cut off the light curtain signal.
During this process, the product (or scrap) must pass through the light curtain. If it is not left in the progressive die through the light curtain, the progressive die will cause damage to the mold or product during the next press.
Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6:Â Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD"Â for you and for us, so we have professional team work and production line can make nice quality in short time.1. Â Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. Â After-Sales service:We have an efficient team to meet 24*7 all day service.
3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Â Engineers can provide service machinery overseas.
Feeder Punching Processing, Feeder Feeding Speed, Punching Mold Processing Technology (MAC2-800)
Trademark: RUIHUI
Transport Package: Wooden Box or Vacuum Packing
Specification: 3800*3300*2750mm
Origin: China, Dongguan
Trademark: RUIHUI
Transport Package: Wooden Box or Vacuum Packing
Specification: 3800*3300*2750mm
Origin: China, Dongguan
Feeder punching processing, feeder feeding speed, punching mold processing technology (MAC2-800)
http://www.ruihui.net
Feeder punching processing, feeder feeding speed, punching mold processing technology (MAC2-800)
http://www.ruihui.net