Disc Harrow Bearings: Disc Harrow Bearing,Disc Bearing,Disc Harrow Bearings Ningbo Borine Machinery Co.,Ltd. , http://www.borine-agroparts.com
1. Split-type power input box equipped with independent safety clutch; a hexagonal shaft is used to transmit power, easy for installation and commissioning; the safety clutch is more sensitive, the effect is obvious and the reliability is high;
2.Prolonged divider, strong laid-corn harvesting ability;
3.High-speed stem pulling device, the stem pulling roller has a diameter of 110mm, suitable for high stem length of corns, fast and efficient;
4.The use of small inclination angle design and the installation of corn ear-blocking rubber sheet effectively reduce the loss of the header;
5.All-metal open-type shield, easy to maintain, durable.
With a line spacing of 550mm, the header can harvest crops with a line spacing ranging from 500mm to 600mm. It is suitable for trans-regional operation; for the planting modes in different regions, the header line spacing can be changed rapidly, realizing multiple uses with one machine.
Widened fast lift conveyor makes material flow more smoothly, and is more suitable for corns with large corn ears and high yield.
Side-mounted front lift conveyor and straw outlet; the straw discharging channel is very short, so the straw can be discharged smoothly without blocking.
New-type separating draught-fan, twelve-blade volute-style separating draught fan, with strong and uniform winds, and good separating effect
Improved ear distributor, the ear sliding plate angle can be adjusted front and back and distribute the ears conveyed by the lift conveyer into four groups of peeling roller. The skin is peeled off cleanly, smoothly and efficiently.
Segmented cast iron peeling roller: the iron roller in the front section contains peeling nails, the middle section is a rubber roller, and the grass cleaning iron roller in the tail section is to match the grass cleaning knife. The front section achieves rough peeling and the rear section conducts refined peeling, featuring high peeling efficiency and no damage to grains; the peeling effect is obviously improved.
New type straw crushing device, with herringbone blades arranged every three in a group, can achieve a good crushing effect but consume less power. It features good fuel economy and balanced load; it will not vibrate easily; the blade goes through wear resistance treatment, so its service life is long; and the stubble height can be adjusted according to demand.
160 horsepower brand-name engine, with high power and low fuel consumption, can be installed with reliable fire protection device and features high security.
Open-type water tank shield, easy to clean, not block easily.
Large-area vibrating screen with four-blade fan achieves separation and impurities discharge, good separation effect, high impurity discharge efficiency and no easy blocking, and has the bract discharged in front of the field Straw Chopper, achieving a good crushing effect.
New-type infinitely variable speed walking mechanism, Nanchang Gear 3YZ reinforced gearbox, flexible operation, smooth gear shift, good reliability; mechanical rod brake and clutch, easy maintenance.
Rear-wheel hydraulic steering, the whole machine structure is compact, the vehicle body is relatively short, so it is easy to make a turn and head back in the field, and achieves good operation adaptability.
Arc Glass Cab: Adjustable angle console, new control system, good ergonomic design, comfortable to operate, convenient, efficient, safe and reliable.
4YZ-4HTechnical Parameters
Serial No.
Project
Unit
Design Value
1
Number of Harvesting Lines
Line
4
2
Line Spacing
mm
550~650
3
External Dimensions (L × W × H)
mm
7700×2240×360
4
Working Width
mm
2600
5
Structural Quality
kg
7350
6
Supporting Engine
Model & Specification
/
WP4T160E200
Rated Power
kW
118
Rated Speed
r/min
2300
7
Wheel Track
Guide Pulley
mm
1580
Drive Wheel
1800
8
Minimum Terrain Clearance
mm
345
9
Harvesting Efficiency
Mu/hour
4~9
10
Fruit Container Volume
m³
3.5
11
Stubble Height
mm
≤100
12
Walking Speed
Km/h
0-25
13
Model & Specifications of Straw Crushing Machine
mm
2300
Wuhan Yueruixiang Technology Co., Ltd is a professional supplier of construction machinery and agriculture machinery, We are located in Wuhan City, Hubei province, China.
Our main products includes Construction machinery: Wheel loader, skid steer loader, Forklift, road roller, bulldozer, motor grader, excavator, plate compactor, rammer, concrete cutter, ect,
And Agriculture machinery: Tractors and farming implements(backhoe, front end loader, wood chipper, rotary riller, lawn mower, plough, Disc Harrow, planter, ect) which wins the high approval in European, South and North America, Africa, Middle East and Asia due to our high quality and exceptional after-sale service. The reliable quality source from the strict quality control system.
At present, some of products have passsed CE certification and ISO9001 quality system and in recent years the company has introduced advanced sequence equipment and technology from America, Germany, which assure the level of technique and measure of detect of the company to reach the international advanced level and form the benigh cycle innovation system of researching, producting, sale and developing.
Welcome to contact with us at any time.
Â
European technology corn ear-harvesting header:
1. Split-type power input box equipped with independent safety clutch; a hexagonal shaft is used to transmit power, easy for installation and commissioning; the safety clutch is more sensitive, the effect is obvious and the reliability is high;
2.Prolonged divider, strong laid-corn harvesting ability;
3.High-speed stem pulling device, the stem pulling roller has a diameter of 110mm, suitable for high stem length of corns, fast and efficient;
4.The use of small inclination angle design and the installation of corn ear-blocking rubber sheet effectively reduce the loss of the header;
5.All-metal open-type shield, easy to maintain, durable.
With a line spacing of 550mm, the header can harvest crops with a line spacing ranging from 500mm to 600mm. It is suitable for trans-regional operation; for the planting modes in different regions, the header line spacing can be changed rapidly, realizing multiple uses with one machine.
Widened fast lift conveyor makes material flow more smoothly, and is more suitable for corns with large corn ears and high yield.
Side-mounted front lift conveyor and straw outlet; the straw discharging channel is very short, so the straw can be discharged smoothly without blocking.
New-type separating draught-fan, twelve-blade volute-style separating draught fan, with strong and uniform winds, and good separating effect
Improved ear distributor, the ear sliding plate angle can be adjusted front and back and distribute the ears conveyed by the lift conveyer into four groups of peeling roller. The skin is peeled off cleanly, smoothly and efficiently.
Segmented cast iron peeling roller: the iron roller in the front section contains peeling nails, the middle section is a rubber roller, and the grass cleaning iron roller in the tail section is to match the grass cleaning knife. The front section achieves rough peeling and the rear section conducts refined peeling, featuring high peeling efficiency and no damage to grains; the peeling effect is obviously improved.
New type straw crushing device, with herringbone blades arranged every three in a group, can achieve a good crushing effect but consume less power. It features good fuel economy and balanced load; it will not vibrate easily; the blade goes through wear resistance treatment, so its service life is long; and the stubble height can be adjusted according to demand.
160 horsepower brand-name engine, with high power and low fuel consumption, can be installed with reliable fire protection device and features high security.
Open-type water tank shield, easy to clean, not block easily.
Large-area vibrating screen with four-blade fan achieves separation and impurities discharge, good separation effect, high impurity discharge efficiency and no easy blocking, and has the bract discharged in front of the field straw Chopper , achieving a good crushing effect.
New-type infinitely variable speed walking mechanism, Nanchang Gear 3YZ reinforced gearbox, flexible operation, smooth gear shift, good reliability; mechanical rod brake and clutch, easy maintenance.
Rear-wheel hydraulic steering, the whole machine structure is compact, the vehicle body is relatively short, so it is easy to make a turn and head back in the field, and achieves good operation adaptability.
Arc Glass Cab: Adjustable angle console, new control system, good ergonomic design, comfortable to operate, convenient, efficient, safe and reliable.
4YZ-4HTechnical Parameters
Serial No.
Project
Unit
Design Value
1
Number of Harvesting Lines
Line
4
2
Line Spacing
mm
550~650
3
External Dimensions (L × W × H)
mm
7700×2240×360
4
Working Width
mm
2600
5
Structural Quality
kg
7350
6
Supporting Engine
Model & Specification
/
WP4T160E200
Rated Power
kW
118
Rated Speed
r/min
2300
7
Wheel Track
Guide Pulley
mm
1580
Drive Wheel
1800
8
Minimum Terrain Clearance
mm
345
9
Harvesting Efficiency
Mu/hour
4~9
10
Fruit Container Volume
m³
3.5
11
Stubble Height
mm
≤100
12
Walking Speed
Km/h
0-25
13
Model & Specifications of Straw Crushing Machine
mm
2300
Wuhan Yueruixiang Technology Co., Ltd is a professional supplier of construction machinery and agriculture machinery, We are located in Wuhan City, Hubei province, China.
Our main products includes Construction machinery: Wheel loader, skid steer loader, Forklift, road roller, bulldozer, motor grader, excavator, plate compactor, rammer, concrete cutter, ect,
And Agriculture machinery: Tractors and farming implements(backhoe, front end loader, wood chipper, rotary riller, lawn mower, plough, disc harrow, planter, ect) which wins the high approval in European, South and North America, Africa, Middle East and Asia due to our high quality and exceptional after-sale service. The reliable quality source from the strict quality control system.
At present, some of products have passsed CE certification and ISO9001 quality system and in recent years the company has introduced advanced sequence equipment and technology from America, Germany, which assure the level of technique and measure of detect of the company to reach the international advanced level and form the benigh cycle innovation system of researching, producting, sale and developing.
Welcome to contact with us at any time.
Â
Disc Harrow bearings are also named Heavy Duty Disc bearings, are made
with Triple Lip seals to protect from the corrosive environments. This
seal is a one piece shield cover with three molded contact seals.
Bearings have Round bore and Square bore, there be Relubricable and
Nonrelubricable two type.Stanard relubrication feature is a drilled hole
in groove. Borine's Disc Harrow bearings are basis on
good quality and competitive prices, repalcement for John Deere,
Case-IH, krause, Massey, Great Plains, AMCO, Kewanee, KMC, New Holland,
Sunflower, White etc OEM parts.
Hot Sale 4yz-4c Corn Harvester Machine for Sale
Model NO.: 4YZ-4C
Portable Harvester Type: Side Hanging Type
Certification: ISO9001:2008, CE
Color: Red
Condition: New
Application Field: Agriculture
External Dimensions (L*W*H)(mm): 7700*2240*360
Walking Speed(Km/H): 0-25
Minimum Terrain Clearance(mm): 345
Stubble Height(mm): ≦100
Rated Power(Kw): 118
Rated Speed(R/Min): 2300
Structural Quality(Kg): 7350
Trademark: YRX
Transport Package: Nude
Specification: CE, ISO
Origin: China
HS Code: 84339010
Model NO.: 4YZ-4C
Portable Harvester Type: Side Hanging Type
Certification: ISO9001:2008, CE
Color: Red
Condition: New
Application Field: Agriculture
External Dimensions (L*W*H)(mm): 7700*2240*360
Walking Speed(Km/H): 0-25
Minimum Terrain Clearance(mm): 345
Stubble Height(mm): ≦100
Rated Power(Kw): 118
Rated Speed(R/Min): 2300
Structural Quality(Kg): 7350
Trademark: YRX
Transport Package: Nude
Specification: CE, ISO
Origin: China
HS Code: 84339010
European technology corn ear-harvesting header: