P11-5A Digital Electronic Punch Magnetic Induction Proximity Switch with Counter
Digital Cumulative Counting Electronic Punch Magnetic Induction Proximity Switch
Â
Â
Magnetic Induction Digital Electronic Counter Instructions
1 {C}Five-digit large LCD display with ultra-low power consumption for clear and easy reading.
2 {C}Use the Counting/Pause button to stop counting. After 0-30 seconds, the LCD will automatically turn off and enter standby mode. Press the button again to reactivate the display and resume counting.
3 {C}Utilizes magnetic induction technology for easy installation and accurate counting results.
4 {C}Maximum counting speed of 20 counts per second for high-performance operation.
5 {C}Reset function can be activated by pressing the internal reset button or an external one (sold separately).
6 {C}Operates on a standard AA 5th battery, eliminating the need for an external power source.
7 {C}Designed with anti-vibration features to ensure stable and reliable performance in various environments.
8 {C}No mechanical parts involved, which makes it safe, durable, and long-lasting.
Â
Technical Specifications:
Power Supply: 1.5V AA Battery
Reset Options: Internal or External
Counting Range: 0 - 99999
Operating Temperature: -5°C to 40°C
Minimum Pulse Width: 10ms
Dimensions: 64*38*38 mm
Magnetic Detection Distance: Approximately 5-10 mm
Non-Detection Distance: ≥ 30 mm
Hole Size: 61*36 mm
Weight: Approximately 100g
Â
Configuration List:
One digital counter, one magnet, one magnetic induction switch, and one pair of mounting supports.
Â
Battery Installation Guide:
- Ensure the battery is properly installed before use.
- Loosen the two outer screws on the casing, then gently remove the back cover (do not damage the signal cable).
- Insert one AA battery (not included; customers must purchase separately). A standard AA battery lasts over six months, while a high-quality one costs around 2 Yuan and lasts more than one and a half years.
- Reattach the back cover and secure the screws.
Â
Usage Method:
To start counting: Connect the magnetic induction switch to the counting terminal. Position the magnet and induction switch according to your application requirements, then perform a count as the magnet approaches and moves away from the switch.
During operation: Keep the magnet within 0.5-1 cm of the switch, then move it to a distance of 3-5 cm to trigger a count. Repeat this process to accumulate counts (e.g., 0, 1, 2, 3...). Note: Start counting when the magnet moves away from the switch.
Adjust the positions of the magnet and switch during assembly to optimize performance.
Pause Counting: Press the Counting/Pause button to stop. The LCD will turn off after 0-30 seconds and enter standby mode (nearly zero power consumption). Press the button again to resume counting.
Reset: Press the Reset button directly, or connect an external Reset button (sold separately) to the reset terminal and press it to reset the device.
Â
Alan Xue
Yueqing Kampa Electric Co., Ltd.
Tel: +0086-577-62729846 | Fax: +0086-577-62780320 | Phone: +0086 15167874317
Web: www.china-kampa.com
Injection Tooling & Mold Built
Injection Tooling & Mold Built,Plastic Part Injection Molding,Parts Injection Molding,Injection Molding
Wisegroup Precison Mold Ltd , https://www.wisegroupasia.com