Gantry Double Plasma Cutting Machine
We are involved in offering high-quality CNC Plasma Cutting Machine to our valuable customers. These products are made from high-quality components.Our company are prominent manufacturers and exporters of high-quality Auto Duct Forming and Cut to Length Machines. Offered products range consists of Auto Duct Forming Machine, Cut to Length Machine and Roll Former Machine. All offered products are manufactured under the direction of experts using quality tested material and latest technology as per industry norms. Sturdy designs, fine finish, high strength, long service life and damage resistance are features of our offered range of products.
Gantry
double plasma CNC cutting machine is a stereotyped product carefully developed
by our company. It has high processing efficiency and is 2.2 times of single
gun cutting. It is a numerical control equipment for metal sheet blanking. It
not only has an appearance atmosphere, but also has stable operation, high work
efficiency and long service life. It can realize cutting of any metal material
according to any pattern. It is widely used in the cutting of sheet metal in
various mechanical manufacture industry.
Type
BLDS-3060
BLDS-4080
BLDS-5080
BLDS-60100
BLDS-80100
Input power
AC380V/50Hz; AC220V/50Hz
Track gauge(mm)
3000
4035
5000
6000
8000
Effective
cutting width(mm)
2300
3300
4300
5300
7300
Machine
width(mm)
3500
4300
5500
6500
8500
Track length(mm)
6000
8000
8000
10000
10000
Number of cutting torch(set)
2
2
2
2
2
Lift(mm)
200
Cutting thickness(mm)
1~30(According to the power supply size)
Cutting speed (mm/min)
450~5000
Idle speed(mm/min)
0~8000
Drive mode
Bilateral drive
System
Shanghai Jiaoda or Beijing Starfire
Operating accurancy
±0.5mm
Cnc Plasma Cutting Machine,Cnc Full Mato Cutting Machine,Gantry Double Plasma Cnc Cutting Machine,Double Plasma Cnc Cutting Machine Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoermachine.com
Bennian Oil Production Plant many low oil wells, machine-mining efficiency of less than 10%. At present, the majority of oil production plants use tubular pumps for exploitation, the depth of the pump under the pump is affected, the general depth of the underground pump is shallow, at 1400 ~ 1800m or so. For deep wells, the tube pump "out of the reach." In July 2005, the oil extraction plant introduced the rod pump efficient lifting supporting technology, using small diameter series oil pump continuous lifting, small pump deep pumping, pump depth up to 2200 ~ 2300m. The test was carried out in No.4 Mine LJL52-10 well and put into production on August 7, with good results. Re-testing is currently underway in LJL 52-12.
Pole pump new technology breakthrough
June 2005, LJL52-10 wells Nissan 2.1t, Nissan 0.5t, water 76.4%. September 7, LJL52-10 well Nissan 6.2t, 4.5t Nissin, water 26%, liquid 1215m. The reason for this huge change in the well is the use of a rod pump efficient lift supporting technology.