Portable Car Wahser Motor Vehicle Cleaning Electric Car Cleaner DIY Cleaning Battery Cleaning Washing DC Cigarette Lighter Car Washing

Model NO.: AM-C035
Model NO.: AM-C035
DIY CAR Motor cleaner

Electric car washer
120W, DC12V, 9A
Water flow: 3.5-6.5L/min
Pressure: 145PSI
G. W.: 6.5/7kg
Firstly thanks for your use of our portable multi-function car washing machine. The washing machine adopts Italian motor technology, and has the performance of low noise, fast speed, strong pressure, and stable. The pump head uses dual filter with water. The outer body of the motor is with spray paint steel and fuel injection and fully sealed waterproof. The components are made of stainless steel. The high-pressure water gun is cooper-specific and has variety of water. The car washing machine is with multi-function of quick and free combination. It is the necessary washing machine product which is flexible and convenient portable.
I, Safety and precautions
1. Prohibits the use of spray gun at people and animals, or used to wash the engine, so as not to cause harm.
2. The machine uses special adapter of DC12V10.5A/AC100V ~ 220V power supply, PLS make sure before use.
3. When using the NE-310 type machine, PLS place the engine in the idle speed, to prevent the loss of car battery power.
4. The machine is built-in thermal protection system, a single continuous water no more than 30 minutes is appropriate.
5. After each use, it must be drained high pressure water within the high pressure pump. Relief can extend using life.
6. In winter to prevent water insde the machine ice, PLS spray water again for some time, until the water is drained.
II, Using instruction
Launch car engine---Plug in the NE310A power---close the door-first wet the car---then brush the car-then wash the car.
1, Open the spray gun, and empty the inside air, turn the water barrel to adjust water shape, adjust the spray nozzle to mist,
Wet the car body, wheels, and rinse dust on the car surface.
2, The pump membrane is anti-acid, anti-alkali, anti-chemicals. Dilution of the washing liquid, then use the machine to spray
The liquid on the car in mist shape.
3. Modulate the nozzle to scattering shape, make the spray and car body in a bevel and wash the car, starting wash from top to
Bottom.
4. Pull out the water filter head and use our special quick connector, which can access to the tap water to supply water.
(Special note: Access to tap water, the water pressure should not exceed 4 kgs. ) DIY CAR Motor cleaner

Electric car washer
120W, DC12V, 9A
Water flow: 3.5-6.5L/min
Pressure: 145PSI
G. W.: 6.5/7kg
Firstly thanks for your use of our portable multi-function car washing machine. The washing machine adopts Italian motor technology, and has the performance of low noise, fast speed, strong pressure, and stable. The pump head uses dual filter with water. The outer body of the motor is with spray paint steel and fuel injection and fully sealed waterproof. The components are made of stainless steel. The high-pressure water gun is cooper-specific and has variety of water. The car washing machine is with multi-function of quick and free combination. It is the necessary washing machine product which is flexible and convenient portable.
I, Safety and precautions
1. Prohibits the use of spray gun at people and animals, or used to wash the engine, so as not to cause harm.
2. The machine uses special adapter of DC12V10.5A/AC100V ~ 220V power supply, PLS make sure before use.
3. When using the NE-310 type machine, PLS place the engine in the idle speed, to prevent the loss of car battery power.
4. The machine is built-in thermal protection system, a single continuous water no more than 30 minutes is appropriate.
5. After each use, it must be drained high pressure water within the high pressure pump. Relief can extend using life.
6. In winter to prevent water insde the machine ice, PLS spray water again for some time, until the water is drained.
II, Using instruction
Launch car engine---Plug in the NE310A power---close the door-first wet the car---then brush the car-then wash the car.
1, Open the spray gun, and empty the inside air, turn the water barrel to adjust water shape, adjust the spray nozzle to mist,
Wet the car body, wheels, and rinse dust on the car surface.
2, The pump membrane is anti-acid, anti-alkali, anti-chemicals. Dilution of the washing liquid, then use the machine to spray
The liquid on the car in mist shape.
3. Modulate the nozzle to scattering shape, make the spray and car body in a bevel and wash the car, starting wash from top to
Bottom.
4. Pull out the water filter head and use our special quick connector, which can access to the tap water to supply water.
(Special note: Access to tap water, the water pressure should not exceed 4 kgs. )

Drilling equipment is used for drilling and construction of this specific conditions of the mechanical devices and equipment, divided into drilling equipment and Drilling tools two categories.  Drilling equipment  mainly by drilling rig, mud pump and mud purification equipment, mud mixer, drilling tower and other components,and drling tools includes driling pipe, adapter/kelly and collar.

Friction Welding Drill Pipe and adapter

Friction welding Drill Pipe and adapter are in accordance with API SPEC 5DP and SY/T5561-2008 Specifications.The steel grade are DZ250,R780,G105,S135 that are after partly or overall heat treatment.The adapter part adopts thermal refining to superior alloy steel 35CrMo or 4137H that`s after thread hardening treatment and phosphating to better antiseize.It also can be produced upon customers` requirements.

Technical specifications

Drill Pipe Diameter

Upset Type

RSC

Model

Steel Grade

mm

Wall 

Thickness

mm

External diameter

 of upset end

mm

Internal diameter 

of upset end

mm

in

60

2 3/8

EU

NC26

DZ50,R780

6/7.11 

65.1

46.10

EU

NC26

G105,S135

7.11

65.1

39.67

73

27/8

EU

NC31

DZ50,R780

9

81.0

54.64

EU

NC31

G105,S135

9.19

81.0

50.80

89

31/2

EU

NC38

DZ50,R780

10

98.4

66.09

EU

NC38

G105,S135

9.35

98.4

63.50

114

41/2

IEU

NC46

DZ50,R780

8

127.0

92.00

IEU

NC46

G105,S135

8.56

119.1

73.02

EU

NC50

G105,S135

8.56

127.0

90.47

127

5

 IEU

NC50

DZ50,R780

10

130.2

90.47

 IEU

NC50

G105,S135

9.19

130.2

90.47

139.7

51/2

IEU

51/2FH

G105,S135

9.17

144.5

96.82

168

65/8

IEU

65/8FH

G105,S135

9.19

176.2

135.00

Drilling machineryDrilling machinery

Drilling Machinery

Drilling Machinery,Drilling Tools,Parts Of Drilling Machinery,Fittings Of Drilling Equipment

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachines.com