Characteristics and operation of strong magnetic separator

Magnetic separator is a new type of machine is suitable for sorting weakly magnetic minerals hematite, limonite, hematite, siderite, iron titanium, Ge iron ore, manganese ore, and the like, have been successfully applied in a number of ore beneficiation plant. The strong magnetic separator has the following characteristics:

1. Energy saving: Only a small amount of electric energy is consumed during the operation of the magnetic separation equipment , and no excitation current is consumed. Dry magnetic separation saves water resources without secondary pollution.

2. High magnetic separation processing capability: The magnetic system adopts open magnetic system design, high mineral processing capacity and no blockage of materials.

3, the magnet is protected and durable: the magnetic system is protected by the drum and does not directly contact with the material, it is easy to protect the magnet, and the operating cost of the equipment is low.

4. Strong magnetic minerals and weak magnetic minerals can be extracted: the purification effect is good, and the mineral content is high after magnetic separation, while the tailings remain less.

5, convenient material loose, separation: dynamic magnetic system, magnetic minerals on the surface of the drum to produce sliding displacement and tumbling, cleaning the drum, the drum is not sticky, and is conducive to material magnetic separation and concentrate quality.

Magnetic separator is one of the most widely used and highly versatile machines in the industry. It is used to remove iron powder from powder granules. Magnetic separators are widely used for resource recovery, timber industry, mining, Other factories such as kiln, chemicals, food, etc. In the process of operating a magnetic separator, we should pay attention to the following problems, so that the magnetic separator can work normally and orderly.

Precautions for opening and stopping the magnetic separator: (1) Before driving, pay attention to check the power supply line, transmission, lubrication system and equipment. Confirm that it is normal, and you can drive without obstacles; (2) The equipment should be driven according to certain conditions. In order. Generally speaking, driving is carried out from the back to the front according to the process, and parking is reversed. (3) When driving, first open the water pipes of each part of the equipment, the discharge port should start smaller, then feed the mine, and gradually adjust to normal operation; (4) When all the equipment is parked, contact the pump management personnel first, then stop the mine, and then gradually close the door and the discharge port. If the water gate is closed without contact, the pump may collapse. Local parking should also be contacted to determine the number of pump starts.

The operation of the magnetic separation process of the magnetic separator is to minimize the tailing grade under the premise of ensuring the quality of the concentrate. To this end, the operator must be "two diligence" and "two quasi".

"Second Qin" is a diligent inspection and diligent contact. Diligent inspection is in the production process, often observe the nature of the ore, the thickness of the grinding, the color of the pulp, the quality of the product, and the water pressure and equipment are normal, so that you can find out in a timely manner that you are always in touch. Always contact and exchange information between processes to master the overall process.

"Second standard" is an accurate judgment and accurate adjustment. That is to say, on the basis of “two Qin”, accurately determine the changes in ore properties and other process factors, and timely and accurately adjust the process.

Classic Car

The classic cars we produce are well know for their high performance that especially come with the terrific appearance, our factory produce 2 to 12 seats classic cars, they are also be called as the luxury cars and high class cars, not beacuase of its luxury appearance but also for its good quality in inner parts,for the classic cars,the chasis we make is aluminum chasis, battery is 48v 170ah maintenance free battery,motor is 4kw or 5kw AC motor, all these high quality key parts make is very stable in qualtiy and a very durable usage

Classic Car,Electric Classic Cars,2 Seaters Classic Car,4 Seaters Classic Car

Yongkang Jinghang Sightseeing Vehicle Co., Ltd. , https://www.jhgolfcarts.com