In strict accordance with ISO 9001:20015 and all company procedures; Offshore Wind Power Foundation Flange Foundation Flange,Offshore Wind Power Foundation Flange,High Quality Wind Power Foundation Flange,Custom Offshore Wind Power Foundation Flange Shanxi Tianbao Group Co.,Ltd. , https://www.tbflange.com
1. About our company:
Our company is a firm engaged in production enterprise, mechanism of rubber has more than 20 years of history.
Companies depend on the technical power, the strict scientific management expertise, product quality and good service, and won the majority of the customer's trust. Many of the product is exported to the united states, canada, australia and india, indonesia and uzbekistan, etc.
Company management certification: ISO 9001: 2000, ISO 17799, ISO 9001: 2008, ISO 14001: 2004, ISO/TS 16949
Our main products are plate vulcanizing press, two-roll mixing mill, rubber extruder, banbury intensive kneader, bale cutter, conveyer belt vulcanizing press, tyre reclaiming machines, rubber refiner, rubber cracker, etc. We especially specialize in the design and manufacture of the nonstandard products.
2. Performance:
1). It controlled by PLC and touch screen for manual control and auto control. The auto control can realize many auto works such as mould closing, air exhausting, temperature control, vulcanization timing, alarming and discharging load when mould opening etc; The touch screen will timely show the temperature of the heating platen at each heating zone.
2). The hydraulic cylinder is made of ZG270-500, the ram is made of close-grained chilled alloy cast iron by casting and fine grinding; The hydraulic cylinder is well sealed by YX shape sealing ring.
3). The guard edge of heating platen adopts hydraulic pressure automatic prop up iron, under the function of four oil cylinder, the iron cushion at two sides of the lower platen will advance and retreat at the same time; There are anti-superpose iron cushion device at the two sides of platen.
4). There is a set of valve group of temperature adjuster on each heating area for the platen. Under the controlling of PLC, it can guarantee the even temperature of each heating area.
5). Hydraulic pressure system: We adopt the famous brand hydraulic pressure station from the domestic and abroad, under the controlling of PLC, it can realize the auto mould closing, air exhausting and load discharging when opening mould.
6). The inphase balance device of the machine: There is an axis that runs through the machine sets below the platform, gear wheels and racks are designed on the two sides of the axis, which can guarantee the horizontal lifting for the platform.
3. Parameters:
Conveyor Belt Production Line For Textile Core Belt
Structure:
Four parts: Top cover rubber; Bottom cover rubber; Reinforced core;
Cross rigid.
Thickness of top cover rubber: 3-6mm;
Thickness of bottom cover rubber: 1.5-4.5mm
Belt core: Cotton, Nylon, EP or Steel Cord
The Width is the same as normal belt. The standard meets with GB/T7984-2001.
Feature:
Corrugated sidewall conveyor belt is one of the most effective ways of elevating materials in a confined space, the economy is achieved by single belt operation, wide range material can be handled, less space requirement, no transfer point, low maintenance and big capacity. Corrugated sidewall belt can be designed into a set of complete transportation system according to application
type
XLB-1400X5700X2
XLB-1400X10000X1
XLB-1600X10000X2
XLB-1800X8000X2
XLB-1800X12000X2
XLB-2000X10000X1
Plate size(mm)
1400X5700
1400X10000
1600X10000
1800X8000
1800X120000
2000X10000
Total pressure(MN)
25.00
49.00
56.00
51.00
74.00
70.00
Pressure unit of platen
3.13
3.5
3.5
3.54
3.4
3.5
Ram. Dia.
360
450
450
600
500
600
Ram number
10
20
18
12
18
16
Max. ram stroke(mm)
400
300
400
600
400
300
Clamping force(MN)
0.72
0.90
1.20
1.20
1.20
1.20
Tensioning force(MPA)
0.60
0.80
1.10
1.00
1.10
1.00
Steam pressure(MPA)
0.63
0.63
0.63
0.63
0.63
0.63
Pressure of cooling water(MPA)
0.3
0.3
0.3
0.3
0.3
0.3
Application
Conveyor belt
Conveyor belt
Conveyor belt
Conveyor belt
Conveyor belt
Conveyor belt
Control system
PLC
PLC
PLC
PLC
PLC
PLC
1. About our company:
Our company is a firm engaged in production enterprise, mechanism of rubber has more than 20 years of history.
Companies depend on the technical power, the strict scientific management expertise, product quality and good service, and won the majority of the customer's trust. Many of the product is exported to the united states, canada, australia and india, indonesia and uzbekistan, etc.
Company management certification: ISO 9001: 2000, ISO 17799, ISO 9001: 2008, ISO 14001: 2004, ISO/TS 16949
Our main products are plate vulcanizing press, two-roll mixing mill, rubber extruder, banbury intensive kneader, bale cutter, conveyer belt vulcanizing press, tyre reclaiming machines, rubber refiner, rubber cracker, etc. We especially specialize in the design and manufacture of the nonstandard products.
2. Performance:
1). It controlled by PLC and touch screen for manual control and auto control. The auto control can realize many auto works such as mould closing, air exhausting, temperature control, vulcanization timing, alarming and discharging load when mould opening etc; The touch screen will timely show the temperature of the heating platen at each heating zone.
2). The hydraulic cylinder is made of ZG270-500, the ram is made of close-grained chilled alloy cast iron by casting and fine grinding; The hydraulic cylinder is well sealed by YX shape sealing ring.
3). The guard edge of heating platen adopts hydraulic pressure automatic prop up iron, under the function of four oil cylinder, the iron cushion at two sides of the lower platen will advance and retreat at the same time; There are anti-superpose iron cushion device at the two sides of platen.
4). There is a set of valve group of temperature adjuster on each heating area for the platen. Under the controlling of PLC, it can guarantee the even temperature of each heating area.
5). Hydraulic pressure system: We adopt the famous brand hydraulic pressure station from the domestic and abroad, under the controlling of PLC, it can realize the auto mould closing, air exhausting and load discharging when opening mould.
6). The inphase balance device of the machine: There is an axis that runs through the machine sets below the platform, gear wheels and racks are designed on the two sides of the axis, which can guarantee the horizontal lifting for the platform.
3. Parameters:
Conveyor Belt Production Line For Textile Core Belt
Structure:
Four parts: Top cover rubber; Bottom cover rubber; Reinforced core;
Cross rigid.
Thickness of top cover rubber: 3-6mm;
Thickness of bottom cover rubber: 1.5-4.5mm
Belt core: Cotton, Nylon, EP or Steel Cord
The Width is the same as normal belt. The standard meets with GB/T7984-2001.
Feature:
Corrugated sidewall conveyor belt is one of the most effective ways of elevating materials in a confined space, the economy is achieved by single belt operation, wide range material can be handled, less space requirement, no transfer point, low maintenance and big capacity. Corrugated sidewall belt can be designed into a set of complete transportation system according to application
type
XLB-1400X5700X2
XLB-1400X10000X1
XLB-1600X10000X2
XLB-1800X8000X2
XLB-1800X12000X2
XLB-2000X10000X1
Plate size(mm)
1400X5700
1400X10000
1600X10000
1800X8000
1800X120000
2000X10000
Total pressure(MN)
25.00
49.00
56.00
51.00
74.00
70.00
Pressure unit of platen
3.13
3.5
3.5
3.54
3.4
3.5
Ram. Dia.
360
450
450
600
500
600
Ram number
10
20
18
12
18
16
Max. ram stroke(mm)
400
300
400
600
400
300
Clamping force(MN)
0.72
0.90
1.20
1.20
1.20
1.20
Tensioning force(MPA)
0.60
0.80
1.10
1.00
1.10
1.00
Steam pressure(MPA)
0.63
0.63
0.63
0.63
0.63
0.63
Pressure of cooling water(MPA)
0.3
0.3
0.3
0.3
0.3
0.3
Application
Conveyor belt
Conveyor belt
Conveyor belt
Conveyor belt
Conveyor belt
Conveyor belt
Control system
PLC
PLC
PLC
PLC
PLC
PLC
1.Make process card and quality plan
2.Choose the qualified raw material and do incoming test, not allowed
nonconforming material to enter into production process;
3.Producing and testing followed the quality documents
4.Be good at Quality records and product identification to ensure the product
traceability
5.Do the final inspection to ensure 100% of pass.
Rubber Belt Vulcanizer / Conveyor Rubber Belt Making Machine
Model NO.: all various rubber belt vulcanizer
Dimension: 12500X6500X2350 mm
12500X6500X2350 mm: 1 Year
Market: Asia, Africa, South and North of America
Piston Stroke: 300-520 mm
Drawing Forece: 0.4-1.0
Type: General Rubber Machinery
Type of General Rubber Machinery: Rubber Calender
Type of Tire Machinery: Flap Curing Press
Trademark: EENOR
Transport Package: Conveyor Belt Making Machine Exporting Standard
Specification: SGS, ISO, CE, BV
Origin: Qingdao, China
HS Code: 84778000
Model NO.: all various rubber belt vulcanizer
Dimension: 12500X6500X2350 mm
12500X6500X2350 mm: 1 Year
Market: Asia, Africa, South and North of America
Piston Stroke: 300-520 mm
Drawing Forece: 0.4-1.0
Type: General Rubber Machinery
Type of General Rubber Machinery: Rubber Calender
Type of Tire Machinery: Flap Curing Press
Trademark: EENOR
Transport Package: Conveyor Belt Making Machine Exporting Standard
Specification: SGS, ISO, CE, BV
Origin: Qingdao, China
HS Code: 84778000
Rubber Belt Vulcanizer / Conveyor Rubber Belt Making Machine