Spodumene heavy medium beneficiation

Since little spodumene gangue minerals associated with the difference in density, using a general jigging, shaking mineral processing and beneficiation spiral reselection method is unsuitable spodumene ore sorting. However, heavy media beneficiation or heavy liquid beneficiation is an effective method for semenite ore. In the production of lithium mines in South Dakota and North Carolina, heavy medium dressing has been used. In South Dakota it was prepared in a processing plant -200 mesh silicon iron weighting agent and the density was 2.7 g / cm 3 medium, heavy medium using a cone concentrator sorting plant of 3.3 to 3.8 mm spodumene ore, As a result, the produced spodumene concentrate grade reached a 5.31% Li 2 O recovery rate of 78%. In North Carolina Gold Mine wire except heavy medium beneficiation machine taper, used heavy medium cyclone sorting finer size range spodumene. Further U.S. Bureau of Mines with further beneficiation art tetrabromo ethane as the heavy liquid (density of 2.9529 g / cm 3) of the heavy liquid cyclone sorting of successive trials spodumene ore, quite satisfactory results are achieved, the feed size For -35 mesh, containing 20% ​​of lithium phosgene, the obtained concentrate contains 92~95% of lithium pyroxene, the recovery rate is 86~89%, and the recovery rate of heavy liquid is above 95%. As long as there is good protection, Tetrabromoethane can be used on a large scale.

Urea Quick Connector with double seal ring radial seal structure, rubber modified by O - ring, mainly for fluid and the physical, chemical properties of custom, prevent aging, corrosion, swelling; O - ring have intermediate spacer ring separated, two sealing rings of the corresponding event space, the rubber matrix bonding does not occur, the external O-ring using synthetic rubber, enhanced mechanical properties, prevent air aging. Sealing ring and a spacer ring through the outer ring of the elastic bayonet device firmly fixed in the shell, does not produce seal off and shift phenomenon produced. Greatly ensure the safety of the seal.

The main difference between the fast joint of urea and the fuel oil is the medium and working temperature.. Urea fast connector is mainly in the urea of the medium, not in other media. As with the Fuel Quick Connector, the pressure of the urea fast connector can also be over - pressure of about 10bar. The working temperature of the urea fast joint is about -60 up to +125.. The fast joint has the compact structure and can be used in the space of the assembly space..

Urea Line Quick Connector

Adblue Hose,Adblue Quick Connector,Urea Quick Connector

Linhai Shinyfly Auto Parts Co.,Ltd. , https://www.chinashinyfly.com