The continuous heavy rain weather is equivalent to a catastrophe for our car friends. Especially in the recent heavy rains in the south, vehicles in many places have encountered rainwater washing and become a veritable bubble truck. Roadside vehicles can be seen everywhere. How do we deal with vehicles that have been exposed to soaking water? Today Xiao Bian gave everyone talk about how to rescue the bubble car: 1 Timely drainage After we stopped heavy rain, we must first drag the vehicle out of the water. Everyone knows. Rainwater is particularly corrosive. If we do not deal with it in time, our vehicles will surely fall ill. The best treatment is: first open the chassis of the car. Carry water out of the car. Then dry the vehicle's seat and the computer's storage module with something like a hair dryer. The seat was then peeled off layer by layer and sun dried under the sun. The carpet was cleaned with a high pressure water gun in time. For the interior of the seat, we must disassemble it thoroughly and clean it thoroughly. For better vehicles, there are sound-insulating cotton in the door trim. If the sound-absorbing quilt is too long, it will lead to serious deformation. We'd better go to a professional shop to change it. At the same time, the four-wheel bearings of the vehicle should be dismantled, cleaned and then lubricated. If there are still strange sounds after processing, it is best to change to a new one. 2 Do not fight We must remember: Never re-rotate the engine after the vehicle has been bubbling, and take the vehicle to the 4S shop for repair. Divide the spark plug and clean it up. Finally, the cylinder pressure is tested. If its difference is large, it means that the engine will be overhauled. Once the vehicle pulls out of the water and hits a fire, the connecting rod of the vehicle will become bent and the situation will be seriously broken. So it's better to change to new ones this time. 3 Check the gearbox After we dismantle the gearbox, it is advisable to send the relevant parts such as the oil circuit and friction discs inside to the professional 4S shop for cleaning and maintenance. The gearbox oil must be directly replaced with new ones. Others see the degree of damage, serious new ones, and no serious direct repairs. The above are three simple things to deal with after the vehicle encounters water, and hopefully it will help the owners.
We are professional manufacturer of Injection Moulding Machine from China,PVC Injection Moulding Machine adopts special PVC screw and barrel to suitable for PVC material, this PVC Injection Molding Machine is sutiable for PVC pipes and errows.
1.Benchtop full-auto pvc injection molding machine adopt pp material special screw , improved plasticizing effciency and reduce plasticizing temperature, effectivly improved the bottle preform cintraction deformation and improved the bottle blowing transparency.
2. increase the ejecting force and ejection stroke, adapt to the requirements of the special bottle prefrom ejection.
3. choose synchronous pressure maint ainting system, improve product pass percent, and reduced themaint aining time.
4. with the hot runner control interface , conventent for the mould connection.
5. the mould claping part adopts the full sedling rype,coonform to the pharmaceutical environmental requirements.
6. the machine specifications are complete,adapt to a variety of different bottle preform
PVC Pipe Injection Molding Machine PVC Pipe Injection Molding Machine,Plastic Injection Machine,PVC Special Injection Moulding Machine,PVC Injection Molding Machine BUEN MACHINERY CO.,LTD , http://www.buenmachine.com