1. Hazard source: The surrounding environment has not been checked. Description of risk and its consequences: It is easy to bruise or bruise the driver of the rubber Tire . Pre-control measures: Check the surrounding environment for safe and reliable support; no obstacles in the operating range, easy to operate and look forward to. 2. Hazard source: Safety inspection of the carriage is not carried out. Description of risks and consequences: Easy to cause accidents. Pre-control measures: The amount of oil and water in the carriage must be sufficient. The lighting, taillights, handlebars, brakes and fire extinguishers must be complete and in good condition. 3. Hazard source: debris splashes during the lowering of the carrier truck blade. Description of risk and its consequences: It is easy to cause spatters to injure people. Pre-control measures: It is strictly forbidden to stand around during the lowering of the blade. 4, the source of danger: two people standing when loading the bracket. Description of risk and its consequences: It is easy to cause the stent to fall and hurt people. Pre-control measures: When loading the vehicle, it is strictly forbidden to stand on both sides of the bracket. 5. Hazard source: The special large chain is not tightened after loading. Description of risk and its consequences: It is easy to cause the bracket to overturn and injure people. Pre-control measures: The special large chain of the Trailer truck must be tightened after loading. 6. Hazard source: There are no shortage of people in the running route of the bracket truck. Description of risks and consequences: susceptible to bruises or crush injuries. Pre-control measures: No personnel are allowed to enter except the signal guides in the running route of the carriage. 7, the source of danger: driving when pedestrians. Description of risks and consequences: susceptible to bruises or crush injuries. Precautions: Pedestrians are strictly prohibited when the carriage is in operation. 8, the source of danger: the bracket truck did not whistle when turning, the speed is too fast. Description of risk and its consequences: It is easy to cause people to hit the pedestrian. When the corner is turned, the middle shaft breaks and hurts people. Pre-control measures: Decelerate the whistle when turning, and advance at a constant speed. 9. Hazard source: The driver is scratched by the long anchor cable during the operation of the bracket truck. Description of risk and its consequences: It is easy to cause the driver to scratch the long cable. Pre-control measures: The driver should concentrate on the operation of the support truck and find that there are long anchor cables to bypass and slow down. 10. Hazard source: The running speed is not stable. Description of risks and consequences: Easy to cause rollover accidents. Pre-control measures: During the process of transporting equipment, the speed should be slowed down. KINMAN, a leading manufacturer in China, specializing in a galaxy of Trailers & Trailer Parts . turnbuckle Turnbuckle, steel turnbuckle, turnbuckles, steel turnbuckles NINGBO KINMAN AUTO PARTS CO.,LTD. , https://www.kinmantrailer.com
Trailers: ATV trailer , Utility Trailer , Box Trailer , Watercraft Trailer, Snowmobile Trailer, Car Trailer , Logging Trailer, Timber Trailer , etc.
trailer parts & trailer accessories: Hitch Ball , Ball Mounts, Trailer Coupler , Trailer Jack , Winch, Wheel Hub , Trailer Light , Pan Fitting , Tie Down , hooks , Rings , Buckles , etc.
For detailed information, pls feel free to contact us.
Hazard source identification of bracket truck
Hazard source identification of bracket truck