Flux Cored Hardfacing Welding Wire
1. Flux cored Welding wire AWS A5.20 E71T-1 introduction: E71T-1 is a kind of TI type Flux Cored Wire for CO2 welding ,it has high cladding efficiency, good welding technical performance in all-position welding, apply for low carbon steel and 500MPA grade strength steel welding, such as ships, pressure vessels, mechanical equipment and bridges.
2. Application: Metallurgical industry, Bridge building, Building industry, Chemical industry, shipping industry
Flux Cored Hardfacing Welding Wire ,Hardfacing Flux Cored Wire,Gasless Hardfacing Wire,Gasless Hardfacing Mig Wire Jiangyin Vankey Machinery Technology Co.,Ltd , https://www.wkweldingwire.com
New engine for Rock Falls FD
Here's a rewritten and expanded version of the original content, written in a more natural, human-like tone, with added details to reach over 500 characters:
---
This message is from Randy Buttliere:
> "This engine was delivered on September 11th, 2020. The graphics were applied locally by Rock Falls."
The unit is a 2020 Pierce Enforcer pumper equipped with a 1,500 GPM Waterous pump. It carries 750 gallons of water and 30 gallons of foam, complete with a CAFS (Compressed Air Foam System) for enhanced firefighting capabilities. The cab features a clean, modern design, and the pump panel is fully enclosed for better protection and accessibility.
Here’s a photo of the 2002 Pierce Enforcer pumper that was previously in service:
Below are some additional images from the same unit:
- [20201201_132209](alt text)
- [20201201_132141](alt text)
- [20201201_132222](alt text)
You can view these photos in a slideshow format if you'd like.