Portable pressure calibrator pressure pump configuration

Pressure pump configuration in a portable pressure calibrator How a pressure pump is configured in a portable pressure calibrator? When measuring pressure, current can be measured. The following is the Instrument World World Network for you to organize.

The portable pressure calibrator is an AC/DC portable meter that can measure current while measuring pressure and display it on the LCD with 24VDC output. Before the addition, the pressure hand-held pressure pump was installed on the panel, making it an ideal on-site calibration instrument.

The pressure calibrator's pressure range is configured according to the user's requirements. If the pressure calibrator with vacuum has a maximum pressure range of -95KPa to 2.5MPa, this calibrator only needs to be equipped with a built-in pressure pump, generally 0 to 6 MPa. Internal pressure calibrators can be configured with built-in pressure pumps, and pressures in excess of this range require the configuration of an external pressure pump.

The technical parameters of the pressure calibrator are as follows: Hand-held pressure pump: Pressure type Pressure medium: Air pressure range: -1 (-950 mbar). . . 40bar pressure adjustment: Handle connection: Standard reference pressure gauge: G3/8 ", internal thread pressure gauge under test: G1/4", hose size / weight: 220X105X63mm/600g Accessories: Nylon seal assembly, plastic box and complete joint connector : G1/8 ", G3/8", G1/2 "(cylindrical) standard reference pressure gauge reduced G1/4" double joints G1/8", G1/4".

Portable pressure calibrator's internal high-performance microprocessor continuously corrects the zero point and linearity of the instrument to ensure good repeatability and stability of the zero point and accuracy in the instrument for a long time, and the measurement accuracy is high.