Reasons for intermittent overflow of flotation machine

Reasons for the intermittent overflow phenomenon of the flotation machine:

The pump gasped the upper process to give the mine an unstable stone washing machine. The pump displacement is too large, the pump slurry is often evacuated, and the cyclone selection is too large, resulting in a low-rock production line for ore pressure.

To stabilize the operation when dealing with intermittent flooding phenomenon, to ensure the pool pump liquid level hematite beneficiation process. Replace the pump or add water to the pump tank to prevent the slurry from pumping the impact crusher .

The intermittent overflow of the flotation machine makes the concentration of sedimentation low:

1. The diameter of the sinking nozzle is too large; 2. The pressure is small; 3. The concentration of the ore is low, and the diameter of the cyclone is large to the roller crusher.

Treatment method: 1. Replace the hemp nozzle with small diameter; 2. Increase the pressure of the cyclone feeding; 3. Increase the concentration of the ore and replace the hematite ore dressing equipment with small diameter. The Raymond machine can be adjusted accordingly according to the actual situation. If the pressure caused by insufficient swirling of the cyclone is small, the price of the crusher can be appropriately supplemented. If the concentration is low, the disk granulator such as the treatment amount can be appropriately increased.

The overflow phenomenon of the flotation machine runs rough: Reason: 1. The size of the cyclone feeding ore is coarse; 2. The diameter of the grit chamber is small, and the grit chamber is blocked by coarse particles or other debris to block the river pebble sand making machine. The overflow running coarse is mainly characterized by low concentrate grade, large concentration of grit, coarse grain size and low moisture of filter cake; if it is blocked by grit chamber, it will cause the magnetic separator to be full of mine phenomenon.

Treatment method: 1. Control to reduce the particle size of the cyclone feeding, appropriately reduce the concentration of the ore and increase the pressure; 2. Replace the larger diameter sanding nozzle according to the actual production situation, switch to the spare cyclone, and clear the plugging cyclone to wash Sand equipment cement production process.

Knife crusher adopts high speed single-phase motor, which has the characteristics of fine structure, small size, light weight, high efficiency, dust free, clean and sanitary, simple operation, beautiful shape and safe and so on, so that the production of medicine, food and chemical industry is more in line with the national standard and reaches the requirement of GMP.