Side mounted compression garbage truck Comparison of side-mounted compression garbage trucks and rear-mounted compression garbage trucks HVAC fittings named air conditioner fittings,produced according to the drawing.hvac fittings,hvac Copper Fittings,air conditioner copper fittings,refrigerator fittings,OEM copper fittings,copper tripod bends,copper u bends,evaporator fittings hvac fittings,hvac copper fittings,air conditioner copper fittings,refrigerator fittings,copper tripod bends,copper u bends,evaporator fittings,OEM copper fittings Taizhou Runde Company , https://www.nerausmotor.com
The side mounted compression type garbage truck is a kind of garbage truck and is a structure of a side loading garbage truck and a compression garbage truck.
How the side mounted compression garbage truck works
The side-mounted compression type garbage truck is used to lift the trash can automatically into the garbage through the rod, and push the garbage behind the carriage to achieve the purpose of compressing the garbage. The compression principle is the use of mechanical, electrical, hydraulic linkage control system, computer control and manual operation In the system, garbage is poured in by means of fillers, push shovels, etc., crushing or flattening, and the waste is squeezed into the carriage and compacted and evacuated. Its characteristics are: large compression ratio and high loading: the loading capacity is equivalent to two and a half times that of non-compressed garbage of the same tonnage level.
The biggest difference between the side-loading garbage truck and the rear-mounted garbage truck is the loading method. The former is a side-mounted device. The trolley can be automatically dumped into the trash by pulling the rod, and the garbage can be pushed to the rear of the compartment to achieve the purpose of compressing the garbage. The latter is loaded into the rubbish from the back through direct loading or manual input, and pushes out rubbish in front of the car to achieve the purpose of compression.
The unloading methods of the two compression garbage trucks are the same, and they are all achieved through the pushing disk in the compression box. The garbage in the roadside trash bin can be collected into the garbage bin, and the garbage truck can be compressed into a block transport by a post compression device, which saves the garbage volume, speeds up the efficiency, and eliminates secondary pollution.
Side-mounted compression type garbage truck use 1. Adapt to different specifications of the trash automatically fed into the compartment 2. The car roof door automatic drive opening and closing;
3. The rear door automatically rotates to open and close;
4. The pushing board inside the compartment can squeeze the garbage and increase the loading capacity of the garbage;
5. The carriages are lifted in parallel and can be docked with various types of compression trucks. The garbage in the carriages is pushed into the compression mechanism of the compression vehicle for compression, avoiding secondary pollution in the transit process.