2, clear signals, familiar with the process flow between the upper and lower posts. 3. Before starting the air, carefully check whether the power cable is scratched or damaged. If the button on the control box is damaged, whether the potentiometer on the inverter hits the zero position, it can be started after confirming normal. 4. During the operation of the impeller, the operator should straighten out the cable on the sliding line. 5. Start the main motor at the start, so that the impeller can rotate to start the travel motor. When stopping, stop the motor first and then stop the main motor. 6. After starting the machine, carefully observe whether the motor and reducer are abnormal. After confirming the normal, the frequency can be gradually increased. 7. Always check whether the operation and sound of each component are abnormal during operation. If abnormalities such as scratching the power cable and buttons on the control box are found, stop immediately and dispose of it. 8. When the coal feeder is walking to both sides, it should be prevented from colliding and slipping out. When adding the amount, it should be uniform, and it is forbidden to suddenly increase the amount. Monel is a solid-solution binary alloy. As nickel and copper are mutually soluble in all proportions, it is a single-phase alloy. Compared to steel, Monel is very difficult to machine as it work-hardens very quickly. It needs to be turned and worked at slow speeds and low feed rates. It is resistant to corrosion and acids, and some alloys can withstand a fire in pure oxygen. It is commonly used in applications with highly corrosive conditions. Small additions of aluminium and titanium form an alloy (K-500) with the same corrosion resistance but with much greater strength due to gamma prime formation on aging. Monel is typically much more expensive than stainless steel. Monel Tube,Monel Pipe,Monel Pipe Tube,Monel Seamless Tube Zhejiang Max Stainless Steel Co.,Ltd , https://www.cnstainlesstube.com
Impeller coal feeder operating procedures
1. Dress neatly and hold a valid certificate.