According to the new version of the GSP, the principle of layout and monitoring of temperature and humidity environment monitoring are as follows: 1. The location of the temperature and humidity sensors is closely related to the area of ​​the warehouse. The area of ​​the drug warehouse determines the number of points for the temperature and humidity sensors. In general, a temperature and humidity monitoring point is installed at 300m2 at room temperature, and two temperature and humidity are installed at 301-600m2. Monitoring points, 601-900m2 installation of three temperature and humidity ... 1501-1800m2 installation of six points, and so on; here we need to pay attention to if the warehouse cut off a separate small library, regardless of the size of the small library Two monitoring points shall be installed; if the warehouse is a three-dimensional library or an elevated library, double-layer rules shall be used for temperature and humidity distribution. 2. Cold storage points: The following should be no less than 2 monitoring points for 20m2 or less, 20-50m2 for no less than 3 monitoring points, 50-150m2 for no less than 4 monitoring points, and 151-300m2 for No less than 5 monitoring points; if there is a separate freezer, one temperature and humidity monitoring point is installed in each counter of the freezer, and a single small bank should be installed with one monitoring point no matter how small the area is; If the plant area needs to be monitored, the scope includes: factory buildings, office buildings, warehouses, main entrances and exits, and perimeter fences. To monitor these areas completely, we must solve the problems of scattered distribution, centralized monitoring, and remote management. In this company's video surveillance solution put forward a combination of wired transmission and wireless transmission. In the place where the private network is in place, it is directly accessed through the network cable; in areas where the private network is not covered but the environment is better, the optical fiber transmission network can be set up; in places that are not conducive to construction, the wireless network can be set up through wireless transmission equipment. The use of network monitoring equipment on network platforms, such as network video servers, network-integrated ball, network cameras, etc., is integrated into enterprise monitoring and management platforms. The factory monitoring environment is poor, and many monitoring points are installed in places that are difficult to maintain. The requirements for equipment stability, rain protection, and dust prevention are high. Therefore, the use of highly integrated embedded terminal equipment in plant monitoring can greatly reduce the equipment failure rate. Most of the system functions are directly completed by the hardware. There will be no problems such as crashes or infections. At the same time, equipped with a hardware detection dog, you can ensure long-term stable operation of the system security. The equipment is of IP66 protection level with built-in automatic temperature adjustment system and is suitable for application in various harsh environments. Some plant sites have high safety levels, such as warehouses, computer rooms, and operating areas. These places have high requirements for fire prevention and anti-theft. How to create a perfect platform and solve the security problems in these key areas is very important. The front-end network integration device can directly access various types of alarm detection devices, such as infrared radiation detectors, smoke detectors, and triple detectors. In the event of a police situation, the system can automatically pop up the alarm site in the center of the screen, linkage warning alarm warning, linkage lights in the field, linkage camera rotation to preset positions and other pre-plans. For example, in a computer room with extremely high environmental requirements, dynamic sensing devices such as temperature and humidity sensors, current and voltage sensors, etc. can be connected to the front-end network integrated device, and a threshold value can be set on the system management platform, over or under a valve. At the time of value, the system will automatically alarm and execute corresponding plans to achieve the purpose of a few people or even no one. Rotary Cultivator,Rotary Tiller,Rotary Tiller For Tractor,Tillers Rotary Cultivator Hunan Nongyou Machinery Group CO.,LTD , http://www.harvesterequipment.com